Telemecanique Sensors
Telemecanique Sensors XS630B1PAL2 inductive proximity sensor 30mm PNP NO
Detects metal objects up to 15 mm away with a shielded 30 mm brass body rated IP68 and IP69K
- 15 mm sensing range detects targets reliably
- 12 to 48 V DC supply fits common control voltages
- 500 Hz switching frequency suits fast automation cycles
- IP68 and IP69K ratings withstand wash-down and immersion
- Nickel-plated brass housing resists corrosion in harsh environments
Telemecanique 30 mm inductive sensor
The Telemecanique Sensors XS630B1PAL2 is a shielded cylindrical proximity sensor with a 30 mm barrel diameter. It detects metal targets at up to 15 mm using a PNP normally-open output. The unit operates on 12 to 48 V DC and connects through a 2 m pre-wired cable. It is built for machinery and automation systems that need reliable presence detection.
Sustained operation at 500 Hz switching
The sensor is rated for a 500 Hz operating frequency, allowing continuous high-speed detection cycles without thermal derating. Its nickel-plated brass housing and IP68 and IP69K sealing protect internal electronics during prolonged exposure to coolant, wash-down or oil mist. The 200 mA maximum load current remains stable across the full -13 °F to 158 °F temperature range. NEMA 4X rating adds corrosion resistance for harsh industrial environments.
Limits of the 3-wire PNP DC interface
The three-wire PNP output requires a DC supply between 12 and 48 V and cannot drive loads exceeding 200 mA. Voltage drops or cable resistance on long runs may reduce the effective sensing distance below the 15 mm maximum. The fixed 2 m cable length restricts mounting distance from the controller unless an extension is added. Shielded construction allows flush mounting but does not increase the specified detecting range.
Highlights
- 15 mm sensing range detects targets reliably
- 12 to 48 V DC supply fits common control voltages
- 500 Hz switching frequency suits fast automation cycles
- IP68 and IP69K ratings withstand wash-down and immersion
- Nickel-plated brass housing resists corrosion in harsh environments
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat does the XS630B1PAL2 generate when running continuously at its 48 V DC supply?
The sensor draws a maximum of 200 mA, so continuous operation at 48 V DC produces modest heat that is easily dissipated by its nickel-plated brass housing within the -13 °F to 158 °F operating range.
What supply voltage must I already have available to power this 30 mm inductive sensor?
A 12 V to 48 V DC source is required; the three-wire PNP output connects directly to that supply and to your PLC or controller input.
Will the 15 mm sensing range and 500 Hz switching speed work reliably with my existing relay-based control panel?
Yes, the normally-open PNP output switches up to 200 mA at 500 Hz, which is compatible with typical relay coils and PLC inputs found in older panels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
