Telemecanique Sensors
Telemecanique Sensors XS608B1NBL2 inductive proximity sensor 8 mm
8 mm shielded inductive sensor detects metal at 2.5 mm, runs on 12 to 24 V DC, outputs 3-wire NPN NC, IP67-rated 303 stainless body, 41 mm long
- Detects metal at 2.5 mm max range
- Operates on 12 to 24 V DC supply
- IP67 and NEMA 4X rated for harsh environments
- 200 mA NPN NC output for PLC integration
- 303 stainless steel body withstands -13 to 158 °F
8 mm inductive sensor for industrial automation
The Telemecanique Sensors XS608B1NBL2 is an 8 mm cylindrical inductive proximity sensor built for machine-level presence detection. Its shielded construction and 303 stainless-steel body suit harsh production environments where coolant, vibration and frequent wash-downs occur.
2.5 mm sensing range with 2.5 kHz switching
Rated for a maximum detecting distance of 2.5 mm, the sensor reliably picks up ferrous targets at close range. The 2,500 Hz operating frequency supports fast cycling on conveyors or indexing tables, while the 200 mA NPN normally-closed output drives PLC inputs directly without an intermediate relay.
IP67 and NEMA 4X protection from -13 °F to 158 °F
A 2 m integral cable and fully potted electronics meet IP67 and NEMA 4X sealing, resisting water jets and corrosion across a -13 °F to 158 °F operating window. The 12 to 24 V DC supply draws only the load current, so heat rise stays negligible inside enclosed panels.
Highlights
- Detects metal at 2.5 mm max range
- Operates on 12 to 24 V DC supply
- IP67 and NEMA 4X rated for harsh environments
- 200 mA NPN NC output for PLC integration
- 303 stainless steel body withstands -13 to 158 °F
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Will the 12 to 24V DC supply work with my existing 24V DC control panel?
Yes, the sensor operates from 12 to 24V DC, so a standard 24V DC panel is within range.
How can I verify the 2,500 Hz switching frequency is performing correctly after wiring?
Use an oscilloscope on the NPN output; a clean square wave at the target passage rate confirms the 2,500 Hz spec.
Does the 2 m cable come terminated, or do I need a separate connector?
The 2 m cable is supplied attached; no extra connector is required unless your panel needs a specific plug.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
