Telemecanique Sensors
Telemecanique Sensors XS530B1PAL2 Inductive Proximity Sensor 30mm PNP NO
Inductive proximity sensor detects metal at 10 mm range with PNP normally-open output on a 2 m cable
- Detects metal targets up to 10 mm away
- Operates on 12 to 24 V DC supply
- PNP normally-open output with 200 mA load capacity
- Withstands wash-down with IP68 and IP69K sealing
- Functions from -13 °F to 158 °F operating range
Industrial Inductive Proximity Sensor
The Telemecanique Sensors XS530B1PAL2 is a 30 mm cylindrical inductive proximity sensor designed for machine-shop automation. It operates on 12 to 24 V DC and provides a 3-wire PNP normally-open output. The shielded construction allows flush mounting in metal fixtures. A 2 m cable supplies the electrical connection for direct wiring into control panels.
Sustained Operation Behaviour
The sensor switches at up to 1 000 Hz with a maximum detecting distance of 10 mm. It handles a continuous load current of 200 mA without derating. The NEMA 4X and IP68/IP69K ratings confirm that ingress protection remains effective during prolonged exposure to wash-down and coolant spray. Stable output is maintained across the full supply voltage range.
Thermal Noise and Power Profile
The nickel-plated brass housing dissipates heat passively so the unit runs silently with no moving parts. Operating temperature spans -13 to 158 degrees F, covering cold storage and high-ambient machining environments. Current draw stays below the 200 mA load limit, minimising power supply loading. The 41 mm overall length keeps the package compact inside crowded enclosures.
Highlights
- Detects metal targets up to 10 mm away
- Operates on 12 to 24 V DC supply
- PNP normally-open output with 200 mA load capacity
- Withstands wash-down with IP68 and IP69K sealing
- Functions from -13 °F to 158 °F operating range
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat or power draw should I expect from the XS530B1PAL2 running continuously on a 24 V DC supply?
The sensor draws a maximum of 200 mA at 12 to 24 V DC, so continuous operation stays well within a few watts and produces negligible heat in the nickel-plated brass housing.
What voltage source and wiring do I need to have ready before installing this 30 mm inductive sensor?
You need a 12 to 24 V DC supply and a three-wire PNP input on your controller; the sensor ships with a 2 m cable for direct connection.
Will the XS530B1PAL2 reliably detect targets on an older machine that only provides a 12 V DC rail?
Yes, the operating range starts at 12 V DC, delivers a 10 mm sensing distance at 1 000 Hz switching frequency, and the IP68/IP69K rating protects it in harsh legacy environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
