We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical nickel-plated brass inductive sensor 30 mm diameter 41 mm length 2 m cable

Telemecanique Sensors

Telemecanique Sensors XS130BLPAL2 Inductive Proximity Sensor 30 mm 10 mm PNP NO 2m Cable IP67

SKU CH-5X19-W4KNY

A shielded inductive proximity sensor detects metal at 10 mm and provides a PNP normally-open output over a 2 m cable

  • Detects metal at 10 mm for precise positioning
  • PNP normally-open output simplifies PLC wiring
  • IP67 and NEMA 4X seal resists water and dust
  • 12–24 V DC supply fits standard control voltage
  • Shielded 30 mm brass barrel mounts flush in metal

Industrial detection

The Telemecanique Sensors XS130BLPAL2 is a cylindrical inductive proximity sensor built for factory automation and machine monitoring. It detects metal targets without contact and suits engineers who need reliable presence sensing in harsh environments. The 30 mm barrel fits standard mounting brackets and the PNP normally open output integrates directly into 3 wire PLC input modules.

Cable and shielding

A fixed 2 m cable eliminates separate connector purchases and reduces potential leak paths. The shielded 30 mm face allows flush mounting in metal structures while maintaining the rated 10 mm sensing distance. NEMA 4X and IP67 ratings mean the housing withstands wash down, coolant spray and temporary immersion without sealing kits.

Range and load limits

The sensor operates from 12 to 24 V DC and switches up to 100 mA at 200 Hz, covering most relay coils and PLC inputs. Nickel plated brass construction survives temperatures from -13 to 158 degrees Fahrenheit. Applications requiring longer range, higher switching current or faster response will need a different sensing principle.

Highlights

  • Detects metal at 10 mm for precise positioning
  • PNP normally-open output simplifies PLC wiring
  • IP67 and NEMA 4X seal resists water and dust
  • 12–24 V DC supply fits standard control voltage
  • Shielded 30 mm brass barrel mounts flush in metal

Specifications

BrandTELEMECANIQUE SENSORS

Questions about this item

Will the 2 m cable need periodic replacement?

The 2 m cable is factory-fitted and designed for the sensor's operating range of -13 to 158 °F; inspect it during routine maintenance and replace only if physical damage occurs.

What limits continuous operation at the 200 Hz switching frequency?

The 100 mA maximum current load is the primary electrical limit; exceeding it can cause output failure during sustained high-speed cycling.

How much heat does the nickel-plated brass body generate during all-day use?

The sensor operates on 12 to 24 V DC with a 100 mA load limit, so self-heating is minimal; the brass housing dissipates heat effectively within the rated temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.