Telemecanique Sensors
Telemecanique Sensors XS108BLPAL2 Inductive Proximity Sensor 8mm PNP NO
An 8 mm inductive proximity sensor with a 1.5 mm sensing range, PNP normally-open output and a 2 m cable
- Inductive detection up to 1.5 mm for precise metal sensing
- 12 to 24 V DC supply fits common industrial power rails
- PNP normally-open output with 50 mA load capacity
- IP67 and NEMA 4X ratings resist water, dust and washdown
- Nickel-plated brass housing endures −13 °F to 158 °F operation
8 mm inductive proximity sensor
The Telemecanique Sensors XS108BLPAL2 is a cylindrical inductive proximity sensor designed for industrial automation. It detects metal objects without physical contact using a PNP normally open output. The shielded construction allows flush mounting in metal surfaces. It suits machine builders and maintenance engineers needing reliable presence detection.
12 to 24 V DC supply and 3 kHz switching
The sensor operates on a 12 to 24 V DC supply with a maximum load current of 50 mA. Its operating frequency reaches 3,000 Hz for fast cycling applications. A 1.5 mm maximum detecting distance defines the practical sensing range. The three-wire cable connection simplifies wiring but fixes the installation length.
Replaces mechanical limit switches in harsh areas
This unit replaces mechanical limit switches where dust, oil, or coolant cause premature wear. The IP67 and NEMA 4X ratings protect against ingress during wash-down. Nickel-plated brass housing resists corrosion across a -13 to 158 °F temperature range. The jump is worth it when contact bounce or actuator wear stops the line.
Highlights
- Inductive detection up to 1.5 mm for precise metal sensing
- 12 to 24 V DC supply fits common industrial power rails
- PNP normally-open output with 50 mA load capacity
- IP67 and NEMA 4X ratings resist water, dust and washdown
- Nickel-plated brass housing endures −13 °F to 158 °F operation
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Should I choose the 8.0 mm or a different diameter for my mounting hole?
The 8.0 mm size fits an M8 threaded hole; choose it when that is the cutout your bracket provides.
What does the 1.5 mm detecting distance mean on the machine?
It will trigger when a metal target comes within 1.5 mm of the sensing face, so position the flag accordingly.
How does the 3-wire PNP output work with a 12 to 24V DC supply?
The sensor sources current to the load when metal is present, sinking up to 50 mA from the 12 to 24V DC rail.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
