Telemecanique Sensors
Telemecanique Sensors XCSPL783 2NC Safety Interlock Switch
Elbow-lever safety interlock switch with dual NC contacts, NEMA 4/4X/12 and IP67 ratings, and a 1/2 in NPT conduit entry
- Elbowed lever for flexible guard mounting
- Dual 1NC/1NC contacts provide redundant safety circuits
- IP67 and NEMA 4/4X/12 ratings suit harsh indoor or outdoor environments
- 6 A AC / 0.55 A DC at 300 V handles standard control circuits
- Compact 1.18 in × 1.18 in body fits tight machine frames
Safety interlock for guarded access
The Telemecanique Sensors XCSPL783 is a safety interlock switch that uses an elbowed lever actuator to confirm a guard position. It provides two normally-closed contacts that open when the guard moves, removing power from hazardous motion. Machine builders and maintenance teams fit it on doors, hatches or covers where a physical key or lever must stay engaged for the circuit to remain live.
Plastic enclosure rated NEMA 12, 4, 4X and IP67
The body is moulded plastic measuring 1.18 in high, 1.18 in wide and 7.06 in deep, with a 2.85 in lever reach. A 1/2 in NPT conduit entry accepts standard fittings for cable protection. The enclosure resists dust, water jets and corrosion indoors or outdoors, so the switch survives wash-down and splashing coolant without ingress.
Contact ratings and temperature define
The switch carries 6 A at 300 V AC and 0.55 A at 300 V DC, which suits control-circuit duties but not direct motor loads. Operating range spans -13 to 158 degrees F, so extreme cold or heat beyond those bounds needs a different device. The two NC contacts give redundant monitoring, yet the single lever style does not suit sliding or hinged guards that need a separate actuator key.
Highlights
- Elbowed lever for flexible guard mounting
- Dual 1NC/1NC contacts provide redundant safety circuits
- IP67 and NEMA 4/4X/12 ratings suit harsh indoor or outdoor environments
- 6 A AC / 0.55 A DC at 300 V handles standard control circuits
- Compact 1.18 in × 1.18 in body fits tight machine frames
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What does the IP67 rating on the XCSPL783 actually protect against in practice?
IP67 means the switch is dust-tight and can withstand temporary immersion in water, matching the NEMA 4, 4X and 12 enclosure ratings for indoor and outdoor use.
What are the exact mounting dimensions for the XCSPL783 body?
The plastic body measures 1.18 in high, 1.18 in wide and 7.06 in deep, with a 1/2 in NPT conduit entry for wiring.
How do you wire the 1/2 in NPT conduit entry on the XCSPL783 without damaging the seal?
Use a listed 1/2 in NPT conduit fitting, tighten to the fitting manufacturer's torque spec, and ensure the gasket seats fully to maintain the IP67 and NEMA 4X seal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
