Telemecanique Sensors
Telemecanique Sensors XCSE7333 Safety Interlock Switch
Solenoid-locking safety interlock switch with 1NO/2NC contacts, NEMA 4/4X/12 and IP67 ratings, 120 V AC solenoid, 1/2 in NPT conduit entry, Zamak body and head, operating range -13 to 158 °F
- Solenoid locking secures hazardous areas until safe
- 1NO/2NC contacts give redundant safety monitoring
- NEMA 4, 4X, 12 and IP67 resist wash-down and dust
- Zamak body and head withstand industrial impact
- 120 V AC solenoid integrates with standard control voltage
Safety Interlock Switch XCSE7333
The Telemecanique Sensors XCSE7333 is a safety interlock switch designed for machine guarding applications. It features solenoid locking with a 1NO/2NC contact configuration and a 120 V AC solenoid voltage. The zamak body and head provide durability in industrial environments.
Suits Guarded Access Points Not High-Density Panels
This switch suits machinery requiring guard-door interlocking with solenoid-controlled locking. The 1/2 in NPT conduit entry fits standard North American wiring practices. Installations needing higher contact density or different voltage ratings should look at alternative devices.
Handles 6 A AC And 3 A DC Loads
The contacts are rated for 6 A at 300 V AC and 3 A at 300 V DC, providing headroom for typical control-circuit loads. IP67 and NEMA 4, 4X, 12 ratings protect against dust, water jets and oil. Operating temperature range spans -13 °F to 158 °F.
Highlights
- Solenoid locking secures hazardous areas until safe
- 1NO/2NC contacts give redundant safety monitoring
- NEMA 4, 4X, 12 and IP67 resist wash-down and dust
- Zamak body and head withstand industrial impact
- 120 V AC solenoid integrates with standard control voltage
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What type of actuator key is needed for the XCSE7333 switch to operate?
The switch requires a separate actuating key; actuator length is key dependent and the key is not included with the switch body.
Can the XCSE7333 be wired into an existing 120 V AC control circuit?
Yes, the solenoid locking mechanism is rated for 120 V AC and the contacts support 6 A at 300 V AC or 3 A at 300 V DC.
How can I verify the XCSE7333 is sealing correctly after installation?
The housing carries NEMA 4, 4X and 12 ratings plus IP67; inspect the 1/2 in NPT conduit entry and Zamak body for tight fit and no ingress during wash-down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
