Telemecanique Sensors
Telemecanique Sensors XCMD21F2L1 limit switch
General purpose limit switch with roller plunger actuator, 1NC/1NO contacts rated 6A at 240V AC or DC, miniature body measuring 1.97 by 1.18 by 0.63 inches, NEMA 1, 2, 4, 6, 6P, 12, 13
- Top-mounted roller plunger enables precise position sensing
- 1NC/1NO contacts switch both AC and DC circuits up to 240 V
- NEMA 1, 2, 4, 6, 6P, 12, 13 ratings suit harsh environments
- Miniature body 1.97 in high by 1.18 in wide fits tight spaces
- Actuator travel of 1.42 in provides reliable mechanical operation
Top-plunger roller limit switch
The Telemecanique Sensors XCMD21F2L1 is a miniature limit switch with a top-mounted plunger and roller actuator. It provides one normally closed and one normally open contact rated at 6A for both 240V AC and 240V DC. The switch suits general-purpose position sensing on machinery and automated equipment.
NEMA 1, 2, 4, 6, 6P, 12, 13 enclosure ratings
The body meets multiple NEMA enclosure ratings including 1, 2, 4, 6, 6P, 12 and 13. This sealing protects the internal contacts against dust, water ingress and oil during continuous operation. The actuator is not boot sealed so the plunger itself relies on the body rating for environmental protection.
Verify 1.18 in width and 0.63 in depth clearance
The switch body measures 1.18 in wide by 0.63 in deep with a height of 1.97 in. The roller plunger extends 1.42 in from the mounting surface. Confirm that the mounting location accommodates these dimensions and that the 1NC/1NO contact configuration matches the control circuit logic.
Highlights
- Top-mounted roller plunger enables precise position sensing
- 1NC/1NO contacts switch both AC and DC circuits up to 240 V
- NEMA 1, 2, 4, 6, 6P, 12, 13 ratings suit harsh environments
- Miniature body 1.97 in high by 1.18 in wide fits tight spaces
- Actuator travel of 1.42 in provides reliable mechanical operation
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat does the 6 A 240 V contact generate during continuous daily operation?
The contacts are rated for 6 A at 240 V AC and DC; normal switching at this rating produces only minimal heat.
What wiring and mounting hardware must I already have to install the 1.42 in roller plunger?
You need suitably rated cable for 6 A circuits, terminals for the 1NC/1NO contacts, and screws to fit the 1.18 in wide miniature body.
Will the NEMA 1, 2, 4, 6, 6P, 12, 13 enclosure ratings match the IP-rated enclosures on my older machines?
The switch meets NEMA 1, 2, 4, 6, 6P, 12 and 13, covering most legacy industrial enclosures that specify equivalent dust and water protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
