Telemecanique Sensors
Telemecanique Sensors XCMD2110L1 limit switch plunger 1NC/1NO 6A 240V AC/DC
A miniature plunger limit switch rated 6 A at 240 V AC/DC with 1NC/1NO contacts and NEMA 1, 2, 4, 6, 6P, 12, 13 protection
- Plunger actuator enables precise position sensing
- 1NC/1NO contacts provide versatile switching options
- 6A at 240V AC/DC handles demanding loads
- Miniature body fits tight machine spaces
- NEMA 1, 2, 4, 6, 6P, 12, 13 ratings ensure environmental protection
Compact Plunger Limit Switch
The Telemecanique Sensors XCMD2110L1 is a miniature limit switch with a top-mounted plunger actuator. It provides one normally closed and one normally open contact rated at 6A for both 240V AC and DC circuits. The body measures 1.97 in high, 1.18 in wide and 0.63 in deep with a 0.39 in actuator length. NEMA ratings 1, 2, 4, 6, 6P, 12 and 13 indicate suitability for indoor, outdoor and wash-down environments.
Replacing Larger or Lower-Rated Switches
This model suits upgrades where a smaller footprint is required without reducing contact rating or environmental protection. The jump is worthwhile when existing switches lack the combined NEMA 4, 6, 6P and 13 sealing or when a miniature body style simplifies mounting in tight machine frames. It also replaces units limited to AC-only ratings by adding equivalent 240V DC capability.
Verify Mounting Space and Circuit Needs
Confirm the 1.97 in height, 1.18 in width and 0.63 in depth fit your mounting layout and that the 0.39 in plunger travel meets the actuation distance required. Ensure the control circuit operates at or below 240V AC or DC and does not exceed 6A per contact. The switch is not boot sealed, so verify that the NEMA 12 and 13 ratings satisfy the expected exposure to oils, coolants or dust.
Highlights
- Plunger actuator enables precise position sensing
- 1NC/1NO contacts provide versatile switching options
- 6A at 240V AC/DC handles demanding loads
- Miniature body fits tight machine spaces
- NEMA 1, 2, 4, 6, 6P, 12, 13 ratings ensure environmental protection
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What are the body dimensions for mounting the XCMD2110L1 limit switch?
The body measures 1.97 in high, 1.18 in wide and 0.63 in deep.
How is the plunger actuator wired and what mistake should be avoided?
Wire the 1NC/1NO contacts to the 6 A, 240 V AC/DC circuit; do not exceed the rated current.
When should the switch be replaced based on its sealing rating?
Replace it if the NEMA 1, 2, 4, 6, 6P, 12 or 13 seal is compromised or the plunger travel exceeds 0.39 in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
