Telemecanique Sensors
Telemecanique Sensors XCKT2110N12 Limit Switch Plunger 1NC/1NO 10A 240V
Miniature plunger limit switch with 1NC/1NO contacts rated 10A at 240V and NEMA 1, 2, 4, 6, 12, 13 protection
- Reliable switching with 1NC/1NO contact configuration
- Handles 10A at 240V AC or DC for versatile power control
- Compact 2 x 2.28 x 1.18 in body fits tight spaces
- NEMA 1, 2, 4, 6, 12, 13 ratings protect against dust and water
- Top-mounted plunger with 0.39 in travel ensures precise actuation
Industrial Limit Switch Plunger
The Telemecanique Sensors XCKT2110N12 is a miniature limit switch with a top-mounted plunger actuator. It provides one normally closed and one normally open contact rated for 10A at 240V AC or DC. NEMA ratings 1, 2, 4, 6, 12 and 13 suit indoor and outdoor industrial control panels.
Sustained Load Behaviour
The switch maintains its 10A contact rating continuously at 240V without derating for duty cycle. Snap-action contacts reduce arcing during repeated actuation, supporting reliable switching over long production runs. The sealed NEMA 4, 6 and 13 ratings protect the mechanism from coolant, oil and wash-down environments.
Build and Mounting Practicalities
A compact body measuring 2 in high, 2.28 in wide and 1.18 in deep fits tight machine frames. Surface mounting holes allow direct attachment to panels or brackets without additional hardware. The 0.39 in actuator travel gives clear tactile feedback while the absence of a boot seal simplifies cleaning in debris-heavy areas.
Highlights
- Reliable switching with 1NC/1NO contact configuration
- Handles 10A at 240V AC or DC for versatile power control
- Compact 2 x 2.28 x 1.18 in body fits tight spaces
- NEMA 1, 2, 4, 6, 12, 13 ratings protect against dust and water
- Top-mounted plunger with 0.39 in travel ensures precise actuation
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat or noise does the XCKT2110N12 generate when it cycles continuously?
The switch has no moving fan or active cooling; it only produces the small mechanical click of the plunger and negligible heat at its 10 A, 240 V rating.
What wiring and mounting hardware must I already have to install this limit switch?
You need surface-mount screws or bolts for the 2.28 in by 1.18 in base, plus conductors rated for 10 A at 240 V to connect the 1NC/1NO contacts.
Will the miniature body and 0.39 in plunger travel fit the same cut-out as my older NEMA 1 limit switch?
The switch carries NEMA 1, 2, 4, 6, 12, 13 ratings and a 2 in body height, so it matches many legacy NEMA 1 enclosures, but verify the 0.39 in actuator travel against your cam profile.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
