Telemecanique Sensors
Telemecanique Sensors XCKP2121N12 Limit Switch Plunger Roller Lever 1NC/1NO 10A 240V .8in Actuator
Miniature limit switch with roller-lever plunger, 1 NC/1 NO contacts rated 10 A at 240 V, NEMA 1, 2, 4, 6, 12, 13
- Reliable switching with 1NC/1NO contact configuration rated 10A at 240V AC/DC
- Compact miniature body fits tight spaces at 2.56in high 1.22in wide 1.18in deep
- NEMA 1 2 4 6 12 13 rating protects against dust water and oil ingress
- Roller lever plunger with .8in actuator length provides smooth mechanical actuation
- Brand new Telemecanique Sensors limit switch built for industrial machinery control
Purpose-built limit switch
The Telemecanique Sensors XCKP2121N12 is a miniature limit switch with a top-mounted plunger roller lever. It suits machine-shop equipment and automotive tooling that need a compact position sensor with a .8 in actuator travel. The 1NC/1NO contact form gives one normally closed and one normally open circuit for simple control logic. Rated for 10 A at 240 V AC or DC, it fits low-power safety and interlock circuits.
Straightforward mounting with a sealed-body caveat
The miniature body measures 2.56 in high, 1.22 in wide and 1.18 in deep, so it slips into tight frames without special brackets. Standard screw terminals accept ring or fork lugs for quick wiring. The actuator is not boot-sealed, so fine dust or coolant spray can reach the mechanism over time; plan a shielded location or a regular cleaning schedule if the environment is dirty.
Handles light-duty loads, stops at 10 A
The switch comfortably carries 10 A resistive loads at 240 V on both AC and DC supplies, covering most relay coils, indicator lamps and small solenoids. NEMA 1, 2, 4, 6, 12 and 13 ratings mean the enclosure resists falling dirt, dripping water, hose-directed water and oil, but it is not rated for submersion or hazardous locations. Circuits above 10 A or voltages beyond 240 V need a larger contactor or an interposing relay.
Highlights
- Reliable switching with 1NC/1NO contact configuration rated 10A at 240V AC/DC
- Compact miniature body fits tight spaces at 2.56in high 1.22in wide 1.18in deep
- NEMA 1 2 4 6 12 13 rating protects against dust water and oil ingress
- Roller lever plunger with .8in actuator length provides smooth mechanical actuation
- Brand new Telemecanique Sensors limit switch built for industrial machinery control
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How can I confirm the XCKP2121N12 limit switch is operating correctly after installation?
Verify the 1NC/1NO contacts change state when the 0.8 in roller lever is actuated, and check continuity matches the 10 A at 240 V rating for both AC and DC circuits.
What comes with the XCKP2121N12 and what must I source separately?
The unit includes the miniature limit switch body with top-mounted plunger and roller lever; mounting hardware, wiring connectors and any required conduit fittings are not included.
Which version of the XCKP2121N12 should I select for my application?
This model is a single configuration — 1NC/1NO contacts, 0.8 in actuator, NEMA 1, 2, 4, 6, 12, 13 enclosure — so choose it when those exact specifications match your requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
