Telemecanique Sensors
Telemecanique Sensors XCKP2118G11 limit switch roller lever 1NC/1NO 10A 240V
Roller-lever limit switch with 1NC/1NO contacts rated 10A at 240V and NEMA 1, 2, 4, 6, 12, 13 enclosure ratings
- Reliable position detection with roller lever actuator
- Handles AC and DC loads at 10A 240V
- Compact miniature body fits tight spaces
- NEMA 1, 2, 4, 6, 12, 13 rated protection
- 1NC/1NO contact form for versatile wiring
Industrial Limit Switch
The Telemecanique Sensors XCKP2118G11 is a miniature limit switch with a roller lever actuator mounted on the side. It provides one normally closed and one normally open contact rated at 10A for both AC and DC at 240V. The compact body suits machinery position sensing where space is limited.
Sustained Load Behaviour
Contacts are rated for continuous 10A operation at 240V without a separate derating for duty cycle. The NEMA 1, 2, 4, 6, 12, 13 enclosure ratings confirm the switch maintains performance in wet, dusty or oil-exposed environments over long periods. No boot seal is fitted on the actuator.
Build and Mounting Implications
The miniature body measures 2.56 in high, 1.22 in wide and 1.18 in deep with a 1.3 in actuator length. Side-mounted rotary lever allows direct engagement from the side of a moving part. NEMA ratings cover indoor and outdoor industrial use but the switch lacks a sealed boot for the actuator shaft.
Highlights
- Reliable position detection with roller lever actuator
- Handles AC and DC loads at 10A 240V
- Compact miniature body fits tight spaces
- NEMA 1, 2, 4, 6, 12, 13 rated protection
- 1NC/1NO contact form for versatile wiring
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat or noise does the XCKP2118G11 generate when it runs continuously all day?
As a purely mechanical limit switch it has no fan or motor, so it produces no audible noise and negligible heat during continuous operation.
What else must I already own for the XCKP2118G11 to work in my circuit?
You need a compatible mounting surface, wiring rated for 10 A at 240 V, and a control circuit that accepts a 1NC/1NO snap-action contact.
Will the XCKP2118G11 fit alongside my older NEMA 12 enclosure hardware?
Yes — its miniature body and NEMA 1, 2, 4, 6, 12, 13 ratings let it mount directly on legacy NEMA 12 enclosures without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
