Telemecanique Sensors
Telemecanique Sensors XCKP2106M12 limit switch cat whisker wobble stick 3A 240V
Top-mounted cat whisker wobble stick actuates at 5.19 in length with 3 A at 240 V AC/DC and 1NC/1NO contacts
- Miniature body fits tight machine spaces
- Cat whisker wobble stick detects multi-direction movement
- 3 A at 240 V AC or DC handles control circuits
- NEMA 1, 2, 4, 6, 12, 13 rated for harsh environments
- 1 NC / 1 NO contacts give flexible wiring options
Miniature Limit Switch for Machine Safety
The Telemecanique Sensors XCKP2106M12 is a miniature limit switch with a cat whisker wobble stick actuator. It provides 1NC/1NO contact operation rated at 3A for both 240V AC and DC circuits. The top-mounted actuator extends 5.19 in and suits position detection on conveyors or guarding.
NEMA-Rated Enclosure Handles Continuous Exposure
The switch body measures 2.56 in high, 1.22 in wide and 1.18 in deep and carries NEMA 1, 2, 4, 6, 12 and 13 ratings. This sealing protects the contacts against dust, water jets and temporary submersion during sustained operation. The boot-sealed actuator option is not fitted on this model.
Verify Mounting Space and Circuit Compatibility
Check that the 5.19 in actuator sweep clears surrounding structure and that the 3A 240V rating matches your control circuit. The miniature body style requires a flat mounting surface with the given width and depth. Buyers needing a sealed actuator boot or a different contact configuration should select another model.
Highlights
- Miniature body fits tight machine spaces
- Cat whisker wobble stick detects multi-direction movement
- 3 A at 240 V AC or DC handles control circuits
- NEMA 1, 2, 4, 6, 12, 13 rated for harsh environments
- 1 NC / 1 NO contacts give flexible wiring options
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat or power does the 3 A 240 V contact draw when the wobble stick runs continuously?
The contacts are rated for 3 A at 240 V AC or DC; the switch body itself draws no measurable power, so heat is only what the load circuit generates.
What mounting hardware or wiring must I already have to install the 5.19 in whisker on a 1.22 in wide miniature body?
You need two M4 or #8 screws for the 1.22 in wide base, plus suitably rated cable and terminals for 3 A 240 V circuits.
Will the NEMA 1, 2, 4, 6, 12, 13 enclosure seal properly against the same conduit fittings I use on older limit switches?
The body meets all listed NEMA ratings, so it fits standard conduit entries used with earlier NEMA-rated switches; verify thread size matches your existing fittings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
