Telemecanique Sensors
Telemecanique Sensors XCKP2102G11 Limit Switch Plunger Roller 1NC/1NO 10A 240V
Miniature top-actuated limit switch with roller plunger, 1NC/1NO contacts rated 10 A at 240 V AC/DC, NEMA 1, 2, 4, 6, 12, 13
- Reliable switching with 1NC/1NO contact form
- Handles 10 A at 240 V AC or DC
- Compact miniature body fits tight spaces at 2.56 in high
- NEMA 1, 2, 4, 6, 12, 13 ratings protect against dust and water
- Roller plunger actuator with 0.8 in travel ensures smooth operation
Industrial limit switch for position sensing
The Telemecanique Sensors XCKP2102G11 is a miniature limit switch with a top-mounted roller plunger actuator. It provides one normally closed and one normally open contact rated at 10A at 240V for both AC and DC circuits. NEMA ratings 1, 2, 4, 6, 12 and 13 confirm suitability for indoor and outdoor industrial environments.
Suits machine builders needing a compact safety
This switch fits applications where a 0.8 in actuator travel and a 2.56 in body height are required. It is not for buyers who need a boot-sealed actuator for harsh contamination, nor for installations requiring a different contact configuration or a larger actuator style.
1NC/1NO contact form decides compatibility
The single-pole double-throw arrangement supplies one make and one break circuit per actuation. Verify that your control logic requires exactly this contact form before ordering.
Highlights
- Reliable switching with 1NC/1NO contact form
- Handles 10 A at 240 V AC or DC
- Compact miniature body fits tight spaces at 2.56 in high
- NEMA 1, 2, 4, 6, 12, 13 ratings protect against dust and water
- Roller plunger actuator with 0.8 in travel ensures smooth operation
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How is the XCKP2102G11 mounted and what alignment step is often missed?
The switch body measures 2.56 in high by 1.22 in wide by 1.18 in deep and mounts via its base holes. The 0.8 in roller plunger must engage the target squarely; off-centre contact causes premature wear.
Which part will need replacement first and how often should it be inspected?
The roller plunger is the primary wear item. Inspect it at each scheduled machine shutdown for flat spots, bearing play or boot damage; replace the complete switch if the roller no longer rotates freely.
What thermal or electrical limit appears first during continuous 10 A operation?
The contacts are rated 10 A at 240 V AC or DC. Sustained loading at that level makes contact temperature the first limiting factor; the NEMA 1, 2, 4, 6, 12, 13 enclosure does not dissipate heat, so duty cycle must stay within the rated current.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
