Telemecanique Sensors
Telemecanique Sensors XCKL115H7 Limit Switch Roller Lever 1NC/1NO 10A 240V
A compact limit switch with a roller-lever actuator and 1NC/1NO contacts rated at 10 A, 240 V AC/DC, in a NEMA 1, 2, 3, 4, 12 miniature body
- Roller-lever actuation gives reliable side-triggering
- 1NC/1NO contacts switch both circuit states
- 10 A at 240 V AC or DC handles heavy loads
- Miniature body fits tight machine spaces
- NEMA 1, 2, 3, 4 and 12 ratings resist dust and water
Telemecanique Sensors XCKL115H7 Limit Switch
The Telemecanique Sensors XCKL115H7 is a miniature limit switch with a rotary roller lever actuator. It provides one normally closed and one normally open contact rated at 10A for both AC and DC circuits at 240V. This switch suits machinery position sensing and safety interlock applications.
Check voltage, current and mounting before ordering
Verify that your control circuit operates at or below 240V and does not exceed the 10A contact rating. Confirm the side-mounted actuator orientation fits the machine geometry and that the 1.36 in lever length provides adequate travel. Ensure the miniature body dimensions of 2.83 in height, 2.04 in width and 1.18 in depth match the available enclosure space.
Thermals noise and power in normal use
The switch has no active cooling or moving parts that generate audible noise during operation. Contact resistance remains low at the rated 10A load, so heat rise is minimal in typical industrial environments. NEMA 1, 2, 3, 4 and 12 ratings confirm the enclosure resists dust, water and oil ingress without requiring external thermal management.
Highlights
- Roller-lever actuation gives reliable side-triggering
- 1NC/1NO contacts switch both circuit states
- 10 A at 240 V AC or DC handles heavy loads
- Miniature body fits tight machine spaces
- NEMA 1, 2, 3, 4 and 12 ratings resist dust and water
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Does the XCKL115H7 limit switch come with mounting hardware or must I buy screws separately?
The switch body measures 2.83 in high, 2.04 in wide and 1.18 in deep with side actuator location; mounting screws are not included and must be sourced to match your panel.
Should I choose the 1NC/1NO contact form or is another version available for this model?
This model is supplied only with a 1NC/1NO contact form rated 10 A at 240 V AC and 10 A at 240 V DC; no alternative contact configuration is offered for the XCKL115H7.
What does the 10 A 240 V rating mean when the switch is installed on a live machine circuit?
It means each contact pair can safely carry up to 10 A at 240 V AC or DC under the NEMA 1, 2, 3, 4 and 12 enclosure ratings provided the miniature body is correctly mounted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
