Telemecanique Sensors
Telemecanique Sensors XCKL102H7 Limit Switch Plunger Roller 1NC/1NO 10A 240V
Limit switch with roller plunger actuator, 1NC/1NO contacts rated 10A at 240V, NEMA 1, 2, 3, 4, 12 miniature body
- Reliable switching with 1NC/1NO contacts rated 10A at 240V
- Compact miniature body fits tight spaces at 2.83×2.04×1.18 in
- Top-mounted roller plunger with 1.71 in actuator for precise actuation
- NEMA 1, 2, 3, 4, 12 rating suits indoor and outdoor environments
- Trusted Telemecanique Sensors brand for industrial-grade durability
Miniature Limit Switch with Roller Plunger
The Telemecanique Sensors XCKL102H7 is a miniature limit switch designed for position detection in industrial machinery. Its top-mounted roller plunger actuator suits automated equipment requiring reliable end-of-travel or sequencing signals. Rated for 10 A at 240 V AC and DC, it fits control circuits in manufacturing and material-handling systems.
NEMA 1 2 3 4 12 Enclosure Rating Limits
The switch carries NEMA type 1, 2, 3, 4 and 12 ratings, meaning it is built for indoor and outdoor use against falling dirt, dripping water, windblown dust, hose-directed water and circulating dust. It is not rated for submersion, prolonged immersion or environments with corrosive agents. The actuator is not boot-sealed, so fine particulates can reach the mechanism over time.
1NC/1NO Contact Form and Dimensional Headroom
The single-pole double-throw contact block provides one normally closed and one normally open circuit for simple logic or safety interlocks. At 10 A the contacts handle typical relay coils, contactors and indicator loads, but they are not suited for direct motor starting or high-inrush devices. The 1.18 in body depth and 1.71 in actuator length allow installation in tight frames, while the 2.83 in height and 2.04 in width set the minimum mounting envelope.
Highlights
- Reliable switching with 1NC/1NO contacts rated 10A at 240V
- Compact miniature body fits tight spaces at 2.83×2.04×1.18 in
- Top-mounted roller plunger with 1.71 in actuator for precise actuation
- NEMA 1, 2, 3, 4, 12 rating suits indoor and outdoor environments
- Trusted Telemecanique Sensors brand for industrial-grade durability
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Should I choose the 1NC/1NO contact form or a different configuration for my control circuit?
The XCKL102H7 provides one normally closed and one normally open contact, letting you wire both a safety stop and a run signal from a single switch.
What does the 10A at 240V rating mean when the switch is installed on my machine?
It means the contacts can carry up to 10 amps at 240 volts AC or DC, so size your circuit protection and wiring for that maximum load.
Which NEMA ratings does this limit switch meet and what environments does that cover?
It meets NEMA 1, 2, 3, 4 and 12, providing protection against dust, falling dirt, rain, sleet, splashing water and hose-directed water indoors or outdoors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
