We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
TelDaykemei 10-port network switch, 8 RJ45 and 2 SFP+ ports, metal case

TelDaykemei

TelDaykemei 8+2 Port 2.5G Network Switch 2x10G SFP+

SKU CH-C6WJ-FMSTE

A 10-port switch with eight 2.5 Gbps RJ45 ports and two 10 Gbps SFP+ uplinks, plus port isolation for camera networks

  • Switch Type10000 Mbps
  • FormatStackable
  • Uplink InterfaceSFP
  • Uplink SpeedSFP+
  • Primary Port Count10
  • Primary Ports8 x RJ45 + 2 x SFP
  • 5 Gbps on eight RJ45 ports for fast wired links
  • Two 10 Gbps SFP+ uplinks handle high-bandwidth backbones
  • Port isolation mode keeps traffic separated for security
  • Store-and-forward switching with large cache cuts latency
  • Ten total ports in a stackable desktop form factor

10-Port 2.5G Switch with Dual 10G SFP+

The TelDaykemei Hi-K0802WS is a 10-port Layer 2 switch built for multi-gigabit wired networks. It delivers eight 2.5 Gbps RJ45 ports and two 10 Gbps SFP+ uplink ports in a stackable metal chassis. Store-and-forward switching with a large internal buffer provides non-blocking, line-rate performance across all ports. Standard and port-isolation operating modes are supported for traffic segmentation.

Installers needing 2.5G density with 10G uplinks

This switch suits deployments where eight 2.5G copper endpoints must aggregate into dual 10G fibre links, such as IP camera clusters or high-speed NAS access. Port isolation mode keeps client traffic separate without VLAN configuration. Buyers who require Power over Ethernet for cameras or access points should look elsewhere, as the specifications list no PoE capability. Managed features such as VLANs, link aggregation or SNMP are also not mentioned in the data.

2.5 Gbps RJ45 port speed

The decisive specification is the 2.5 Gbps line rate on every copper port, which is 2.5 times faster than standard Gigabit Ethernet while using existing Cat5e or Cat6 cabling. Combined with two 10 Gbps SFP+ uplinks, this ratio eliminates the bottleneck that appears when multiple 2.5G devices share a single 1G uplink. If your endpoints only negotiate 1 Gbps, a cheaper Gigabit switch will deliver the same result.

Highlights

  • 5 Gbps on eight RJ45 ports for fast wired links
  • Two 10 Gbps SFP+ uplinks handle high-bandwidth backbones
  • Port isolation mode keeps traffic separated for security
  • Store-and-forward switching with large cache cuts latency
  • Ten total ports in a stackable desktop form factor

Specifications

BrandTelDaykemei
SeriesNetwork switch
ModelGigabit switch
Switch Type10000 Mbps
FormatStackable
Uplink InterfaceSFP
Uplink SpeedSFP+
Primary Port Count10
Primary Ports8 x RJ45 + 2 x SFP
Primary Port Speed2.5 Gbps
Primary Port TypeRJ45

Questions about this item

How much power does the TelDaykemei 8+2 Port 2.5G Network Switch draw when all ten ports are running at full speed?

The switch has a maximum power draw of 45 watts, so a standard mains socket is sufficient for continuous operation.

Which SFP+ modules and cables must I already have to use the two 10 Gbps uplink ports?

The uplinks accept any standard SFP+ transceiver, so you can choose copper or fibre modules that match your existing link distances.

Will my older 1 Gbps and 100 Mbps devices work properly when plugged into the eight 2.5 Gbps RJ45 ports?

Each RJ45 port auto-negotiates down to 1 Gbps or 100 Mbps, so legacy gear connects without configuration changes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.