TEKTON
TEKTON SID23323 1/2 Inch Drive 23 mm 12-Point Impact Socket
1/2 inch drive deep impact socket with 12-point 23 mm opening and permanent high-visibility markings for use with friction ring or detent pin anvils, meeting 1.3 times ANSI/ASME proof torque standard
- 1/2-inch drive fits standard impact wrenches
- 23 mm deep socket reaches recessed fasteners
- 12-point geometry engages bolts from multiple angles
- Laser-etched and stamped size markings stay readable
- Meets 1.3× ANSI/ASME proof-torque standard
Deep Impact Socket for 1/2 Inch Drives
The TEKTON SID23323 is a 1/2 inch drive deep impact socket built for professional mechanics and serious DIYers who need reliable fastener removal on trucks, heavy equipment and automotive suspensions. Its 23 mm opening fits common metric hardware found on larger vehicles.
12-Point Geometry Engages Rounded Fasteners
The 12-point internal profile contacts flats rather than corners, allowing the socket to grip damaged or rounded bolt heads that a 6-point design would slip on. Each socket meets a minimum of 1.3 times the ANSI/ASME proof torque standard.
Works With Friction Ring and Detent Pin Anvils
Dual compatibility means the socket locks securely onto both common impact wrench anvil types without needing separate adapters. Permanent stamped markings and high-visibility laser etching ensure size identification remains readable through heavy shop use.
Highlights
- 1/2-inch drive fits standard impact wrenches
- 23 mm deep socket reaches recessed fasteners
- 12-point geometry engages bolts from multiple angles
- Laser-etched and stamped size markings stay readable
- Meets 1.3× ANSI/ASME proof-torque standard
Specifications
| Brand | TEKTON |
|---|
Questions about this item
What does the 1.3 times ANSI/ASME proof torque rating mean when I am using this 23 mm socket on an impact gun?
The socket is tested to withstand at least 1.3 times the industry proof-torque requirement, so it resists cracking or permanent distortion under the high, repetitive loads an impact wrench delivers.
How does the 1/2 inch drive interface work with different anvil types on my impact wrench?
The drive end accepts both friction-ring and detent-pin anvils, letting you clip the socket onto either retention style without an adapter.
What clearance do I need around a 23 mm fastener for this deep 12-point socket to fit?
The deep, 12-point bore reaches recessed nuts and bolts while the 12-point geometry lets you engage the fastener at twice as many angles as a 6-point design.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
