TEKTON
TEKTON SHD33138 3/4 Inch Drive 38 mm Deep Socket
A 3/4 inch drive deep socket with a 38 mm opening for heavy-duty fastening tasks
- 3/4 inch drive fits large ratchets and breaker bars
- 38 mm deep socket reaches recessed fasteners
- 6-point design grips flats to reduce rounding
- TEKTON brand built for professional garage use
- Model SHD33138 identifies the exact socket size
3/4 Inch Drive 38 mm Deep Socket
This 6-point socket fits a 3/4 inch square drive and has a 38 mm deep well for reaching recessed fasteners. It is sized for heavy-duty automotive and industrial bolting work where standard-length sockets cannot reach. The deep profile clears long threads and stud ends without bottoming out.
Forged Chrome Vanadium Construction
The socket is forged from chrome vanadium steel and finished with a corrosion-resistant coating that withstands shop fluids and repeated impacts. Its six-point opening grips the flat sides of a fastener rather than the corners, reducing the risk of rounding off stubborn bolts. The 3/4 inch drive square accepts large ratchets, breaker bars and impact guns.
38 mm Deep Well Reach
The 38 mm depth is the single dimension that decides whether this socket clears your specific fastener and stud length. Measure the exposed thread or stud height before ordering; if the reach is shorter you will need a different depth, and if it is longer this socket will not engage fully.
Highlights
- 3/4 inch drive fits large ratchets and breaker bars
- 38 mm deep socket reaches recessed fasteners
- 6-point design grips flats to reduce rounding
- TEKTON brand built for professional garage use
- Model SHD33138 identifies the exact socket size
Specifications
| Brand | TEKTON |
|---|
Questions about this item
What drive size does the 3/4 inch drive 38 mm deep socket use?
The socket uses a 3/4 inch drive size for compatibility with matching ratchets and extensions.
What physical dimensions determine whether this socket fits my fastener?
The socket fits a 38 mm fastener with a deep 6-point design for full engagement.
How do I install this socket onto my drive tool, and what mistake should I avoid?
Press the socket firmly onto the 3/4 inch drive until it locks; do not force it if alignment is off.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
