TEKTON
TEKTON SHD33119 3/4 Inch Drive 19 mm Deep Socket
A 19 mm deep 6-point socket with a 3/4 inch drive for high-torque fasteners
- 3/4 inch drive fits large ratchets and breaker bars
- 19 mm deep 6-point socket reaches recessed fasteners
- TEKTON brand trusted by professional mechanics
- High-strength steel construction resists rounding under torque
- Deep well design clears long studs and bolts
Professional Socket
The TEKTON SHD33119 is a 3/4 inch drive deep socket sized at 19 mm for heavy-duty fastener work. It serves mechanics and technicians who need reliable engagement on larger bolts in automotive, industrial or agricultural settings.
Shallow Socket Replacement
This deep 6-point design replaces standard shallow sockets when fastener threads extend beyond the socket face or when extra reach is required. The jump is worth it whenever a shallow socket bottoms out before the nut is fully seated or removed.
Drive Compatibility Check
Verify that your ratchet, breaker bar or impact gun accepts a 3/4 inch square drive before ordering. Confirm the 19 mm size matches the fastener you are working on and ensure adequate clearance for the deep socket length in your workspace.
Highlights
- 3/4 inch drive fits large ratchets and breaker bars
- 19 mm deep 6-point socket reaches recessed fasteners
- TEKTON brand trusted by professional mechanics
- High-strength steel construction resists rounding under torque
- Deep well design clears long studs and bolts
Specifications
| Brand | TEKTON |
|---|
Questions about this item
What drive size ratchet or breaker bar does the 3/4 inch drive socket fit?
The socket has a 3/4 inch square drive opening that accepts any standard 3/4 inch drive ratchet, breaker bar or extension.
How do you seat the socket onto a 19 mm fastener without rounding the corners?
Align the 6-point opening squarely on the nut or bolt, press the socket fully onto the fastener until it bottoms out, then apply steady torque — avoid hammering or using a cheater pipe that can cock the socket.
When should the deep 6-point socket be replaced due to wear?
Replace it when the 19 mm opening shows visible rounding, cracks, or when the square drive walls are deformed enough to wobble on a 3/4 inch drive tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
