TEKTON
TEKTON SHD33040 3/4 Inch Drive Socket
A 3/4 inch drive deep socket with a 1-9/16 inch 6-point opening for heavy-duty fastening
- 3/4 inch drive fits large fasteners
- 1-9/16 inch deep socket reaches recessed bolts
- 6-point design grips flat sides securely
- Deep well engages long threads fully
- TEKTON brand built for professional use
TEKTON 3/4 Inch Drive Socket
The TEKTON SHD33040 is a 3/4 inch drive deep socket sized at 1-9/16 inch with a 6-point opening. It fits heavy-duty ratchets and breaker bars used in commercial vehicle and industrial maintenance. Mechanics who need a single deep socket for large fasteners will find it matches the drive size and hex dimension required for the job.
Deep 6-Point Engagement Under Load
The deep well allows the socket to reach past protruding studs or nuts seated far down a bolt. Six-point geometry contacts the flat sides of the fastener rather than the corners, so torque transfers evenly when a breaker bar is leaned on for extended periods. This reduces rounding on stubborn hardware that has been tightened for years.
Direct Fit On Standard 3/4 Inch Tools
The square drive accepts any 3/4 inch ratchet, breaker bar or torque wrench without adapters. No additional pins or retaining rings are supplied, so the user must provide the correct retention method for their drive tool. Builders who need a complete socket set or a different hex size will need to source those separately.
Highlights
- 3/4 inch drive fits large fasteners
- 1-9/16 inch deep socket reaches recessed bolts
- 6-point design grips flat sides securely
- Deep well engages long threads fully
- TEKTON brand built for professional use
Specifications
| Brand | TEKTON |
|---|
Questions about this item
How much heat does the 3/4 inch drive socket generate during continuous heavy use?
The socket is a passive steel tool with no moving parts or power draw, so it produces no measurable heat regardless of how long it is used.
What drive tools must I already own to use this 3/4 inch drive socket?
You need a 3/4 inch drive ratchet, breaker bar, or impact wrench to turn the socket; no other tools are required.
Will this 3/4 inch drive socket fit the older 3/4 inch drive ratchets I already have?
Yes, it follows the standard 3/4 inch square-drive interface, so it engages any 3/4 inch drive tool regardless of age or brand.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
