TEKTON
TEKTON SHD32224 3/4 in drive 15/16 in 12-point socket
A 3/4 inch drive 12-point socket sized at 15/16 inch for heavy-duty fastening tasks
- 3/4 inch drive fits large fasteners
- 15/16 inch size matches specific bolt heads
- 12-point design engages from multiple angles
- TEKTON brand built for professional use
- Hand drive socket ready for manual torque
3/4 inch drive 12-point socket
The TEKTON SHD32224 is a 3/4 inch drive socket with a 15/16 inch 12-point opening. It is designed for hand-driven fastening tasks on large fasteners found in heavy equipment, agricultural machinery or commercial vehicles. The 12-point geometry engages the fastener at more angles than a 6-point design. Professional technicians and serious hobbyists will find it fits standard 3/4 inch drive ratchets and breaker bars.
Suits high-torque hand applications
This socket suits mechanics who need a single 15/16 inch size for hand-driven work on large bolts and nuts. It does not suit anyone requiring an impact-rated socket for powered tools, nor buyers who need a full set of sizes rather than an individual piece. Users working exclusively with smaller 1/2 inch drive tools will find the drive size incompatible. The 12-point profile also offers less contact area than a 6-point socket on heavily rounded fasteners.
Direct fit on 3/4 inch drive tools
Installation is a simple push onto any 3/4 inch square drive ratchet, breaker bar or extension; no adapters are required. The most common issue is accidentally selecting an impact socket for hand use or vice versa, which this product avoids by being clearly a hand-drive tool. Another frequent mistake is forcing the socket onto a damaged or oversized fastener, which can round the 12-point corners. Always verify the fastener measures 15/16 inch before applying force.
Highlights
- 3/4 inch drive fits large fasteners
- 15/16 inch size matches specific bolt heads
- 12-point design engages from multiple angles
- TEKTON brand built for professional use
- Hand drive socket ready for manual torque
Specifications
| Brand | TEKTON |
|---|
Questions about this item
What drive size ratchet or breaker bar is required for the 3/4 in drive socket?
A 3/4 in drive ratchet, breaker bar, or impact wrench is needed to turn the socket.
Will the 12-point opening fit the 15/16 in fasteners on my older equipment?
Yes, the 12-point geometry engages 15/16 in hex and square heads, including many older SAE fasteners.
How can I verify the socket is fully seated on the fastener after setup?
The socket should sit flush on the fastener with no visible gap and the drive tang must lock securely into your ratchet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
