TEKTON
TEKTON SHD23025 1/2 Inch Drive Deep Socket
A 1/2 inch drive deep 6-point socket for hand tightening and loosening fasteners
- 1/2 inch drive fits standard ratchets
- 1 inch deep well reaches recessed fasteners
- 6-point opening grips flats not corners
- TEKTON brand built for professional use
- First listed by manufacturer February 2022
Deep Socket for 1/2 Inch Drive
The TEKTON SHD23025 is a 1 inch deep 6-point socket built for a 1/2 inch drive. It fits standard ratchets and breaker bars used in automotive and general mechanical work. The deep well reaches recessed fasteners that a standard socket cannot engage. Mechanics and DIY owners who need reliable access to deep bolts will find it suitable.
Capacity and Headroom
The 6-point geometry grips the flat sides of a fastener rather than the corners, reducing rounding risk on stubborn bolts. The deep profile provides the length needed for long studs or nuts seated far down a thread. It handles typical high-torque tasks where a shallow socket would bottom out. Very large or severely damaged fasteners may exceed the socket’s engagement depth or drive limit.
1/2 Inch Drive Interface Limits
The 1/2 inch square drive sets the practical torque ceiling for this tool. Excessive force from long breaker bars or impact guns can shear the drive walls or round the socket’s internal corners. The 1 inch opening restricts use to that specific fastener size; smaller or larger bolts require a different socket. Continuous heavy impact use accelerates wear beyond what the hand-drive design intends.
Highlights
- 1/2 inch drive fits standard ratchets
- 1 inch deep well reaches recessed fasteners
- 6-point opening grips flats not corners
- TEKTON brand built for professional use
- First listed by manufacturer February 2022
Specifications
| Brand | TEKTON |
|---|
Questions about this item
Will the 1/2 inch drive on this SHD23025 socket fit the ratchet and breaker bar I already own?
Yes, the 1/2 inch square drive matches the standard size used on most 1/2 inch ratchets, breaker bars, and torque wrenches, so it will connect directly to your existing tools.
How can I confirm the 6-point geometry is gripping the fastener correctly once I start turning?
You will feel the socket seat fully onto the 1 inch fastener with the 6-point walls contacting the flats, and the drive will transmit torque without rounding the corners.
Does the SHD23025 come with any accessories or do I need to buy a drive tool separately?
The package contains only the single deep 6-point socket; a 1/2 inch drive ratchet, breaker bar, or other turning tool must be supplied separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
