TEKTON
TEKTON 33130 3/4 inch drive 30 mm deep socket
A 30 mm deep 6-point socket fits 3/4 inch drive tools for high-torque fastening tasks
- 3/4 inch drive fits large ratchets and breaker bars
- 30 mm deep socket reaches recessed fasteners on heavy equipment
- Six-point opening grips flat sides to prevent rounding
- TEKTON branding indicates professional-grade tool storage design
- New condition ensures full factory specification and finish
Deep Socket for 3/4 Inch Drive
This TEKTON 33130 deep socket fits a 3/4 inch square drive and engages a 30 mm fastener with a 6-point opening. The longer body reaches nuts on extended studs where a standard socket cannot. It is built for high-torque applications in heavy equipment and commercial vehicle maintenance.
Mechanics working on large trucks
Technicians who service passenger cars or light trucks will find the drive size too large for their common fasteners. Buyers needing a shallow socket or a different metric diameter should choose another tool.
30 mm 6-point opening on 3/4 inch drive
The single specification that determines fit is the 30 mm hex opening combined with the 3/4 inch drive square. Match both dimensions to the fastener and the ratchet or impact gun in use.
Highlights
- 3/4 inch drive fits large ratchets and breaker bars
- 30 mm deep socket reaches recessed fasteners on heavy equipment
- Six-point opening grips flat sides to prevent rounding
- TEKTON branding indicates professional-grade tool storage design
- New condition ensures full factory specification and finish
Specifications
| Brand | TEKTON |
|---|
Questions about this item
What does the 3/4 inch drive size mean for torque capacity on the TEKTON 33130?
The 3/4 inch drive accepts high-torque ratchets and breaker bars suited for large fasteners, letting you apply maximum leverage on the 30 mm deep socket without drive slippage.
What clearance does the TEKTON 33130 deep socket need to fit over a 30 mm nut?
The deep well provides extra length to reach nuts on long studs or recessed bolts, while the 6-point opening grips the 30 mm flats securely without rounding.
How do I correctly install the TEKTON 33130 onto a 3/4 inch drive tool?
Align the socket's square drive hole with the tool's tang, push firmly until the detent ball clicks into the socket's retention groove, then tug to confirm it is locked before applying force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
