TEKTON
TEKTON 33043 3/4 Inch Drive Deep 6-Point Socket 1-11/16 Inch
A 3/4 inch drive deep 6-point socket sized at 1-11/16 inch for heavy-duty fastening
- Deep 6-point design grips fastener flats
- 3/4 inch drive fits heavy-duty ratchets
- 1-11/16 inch opening matches large hardware
- TEKTON brand built for professional use
- New condition ready for immediate work
Deep 6-Point Socket for Heavy Fasteners
The TEKTON 33043 is a 3/4 inch drive deep socket sized at 1-11/16 inch. It targets mechanics and technicians who work on large equipment, commercial vehicles or industrial machinery where standard 1/2 inch drive tools lack the necessary leverage and strength. The six-point opening grips the flat sides of stubborn or damaged hex fasteners to reduce rounding risk. This tool is not for light automotive repair or confined spaces where a smaller drive size is required.
High-Strength Chrome Vanadium Construction
The socket body is forged from chrome vanadium steel and finished with a corrosion-resistant coating. The deep well allows access to recessed nuts on long threaded studs without needing an extension. The six-point geometry distributes torque across thicker walls rather than sharp corners. There are no bundled accessories, software or storage cases included with this single socket. Buyers who need a matched set or organisers must source them separately.
Direct Fit on 3/4 Inch Drive Tools
Installation is a simple push onto any 3/4 inch square drive ratchet, breaker bar or impact gun with a compatible retaining pin or ball detent. The deep bore slides over protruding threads without bottoming out. The most common issue is attempting to use this heavy socket on a 1/2 inch drive tool with an adapter, which risks shearing the smaller drive anvil under high torque. Verify your drive tools match the 3/4 inch specification before applying full load.
Highlights
- Deep 6-point design grips fastener flats
- 3/4 inch drive fits heavy-duty ratchets
- 1-11/16 inch opening matches large hardware
- TEKTON brand built for professional use
- New condition ready for immediate work
Specifications
| Brand | TEKTON |
|---|
Questions about this item
Will the 6-point socket opening on the TEKTON 33043 round off over time?
The 6-point design grips fastener flats instead of corners, reducing rounding during high-torque use on the 1-11/16 inch size.
What stops me from using the 3/4 inch drive socket continuously on heavy jobs?
The 3/4 inch drive square and deep socket wall handle sustained impact loads; the limit is the fastener or ratchet strength, not the socket itself.
Does the TEKTON 33043 get hot or noisy when run all day with an impact gun?
The chrome vanadium steel socket stays cool and silent; only the impact tool generates heat and noise during extended operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
