TEKTON
TEKTON 3/8 Inch Drive x 10 mm Universal Joint Socket tool storage
A 3/8 inch drive universal joint socket sized at 10 mm for angled fastener access
- Universal joint reaches fasteners at difficult angles
- 3/8 inch drive fits standard ratchets and extensions
- 10 mm socket size covers common metric applications
- TEKTON brand recognised for professional-grade tools
- Listed February 15 2022 as current product
3/8 Inch Drive 10 mm Universal Joint Socket
The TEKTON SHD18110 is a hand-drive socket with a 3/8 inch drive and 10 mm opening. It uses a universal joint to reach fasteners at awkward angles in tight engine bays or machinery. Mechanics and DIY owners who need a single offset socket for occasional access jobs will find it useful. Buyers needing a full socket set or multiple sizes should look elsewhere.
Thermals noise and power draw in normal use
As a purely mechanical tool it produces no heat, no audible noise and draws no electrical power during operation. There are no moving parts beyond the joint pivot so nothing warms up or whines under load. The socket simply transmits torque from the ratchet to the fastener without any energy consumption.
Sustained load behaviour under continuous torque
The forged steel body and joint are built to withstand repeated high-torque applications without rounding or binding. Under sustained load the universal joint maintains its range of motion and does not stiffen or develop play. It is not suited for continuous powered impact use where a dedicated impact socket would be required.
Highlights
- Universal joint reaches fasteners at difficult angles
- 3/8 inch drive fits standard ratchets and extensions
- 10 mm socket size covers common metric applications
- TEKTON brand recognised for professional-grade tools
- Listed February 15 2022 as current product
Specifications
| Brand | TEKTON |
|---|
Questions about this item
How do I install the TEKTON 18110 universal joint onto a 3/8 inch drive ratchet and 10 mm socket?
Press the 3/8 inch drive end onto the ratchet anvil until the detent ball locks, then press the 10 mm socket onto the joint's output square until its detent engages; the step often missed is verifying both detents are fully seated before applying torque.
What maintenance will the TEKTON 18110 universal joint need over time?
Wipe debris from the pivot pins after each use, apply a light machine oil to the moving joint monthly, and replace the tool if the detent balls no longer hold sockets or if the pivot develops noticeable slop.
What limit appears first when the TEKTON 18110 universal joint is used continuously under load?
The pivot joint binds at extreme angles, causing the drive to lose engagement before the 10 mm socket or 3/8 inch drive reaches its strength limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
