We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
TEKTON 1/2 inch drive 22 mm shallow 6-point impact socket, manganese phosphate finish

TEKTON 1/2 Inch Drive 22 mm Shallow 6-Point Impact Socket SID22122

SKU CH-MNBR-R5E46

A 22 mm shallow 6-point impact socket with a full-length well and radiused corners that prevent fastener round-off

  • TypeO-Rings, X-Rings & Cord Stock
  • MaterialSteel
  • Selling UnitBox
  • Item Count1 pack
  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • Standards/CertificationsADA Compliant
  • Dual size markings for quick identification
  • Full-length well improves fastener engagement
  • Compatible with friction-ring or detent-pin anvils
  • Radiused corners prevent fastener round-off
  • 50BV30 Cr-V steel with phosphate coating

1/2 Inch Drive 22 mm Impact Socket

This TEKTON socket fits a 1/2 inch drive and engages 22 mm fasteners with a shallow 6-point profile. It is built for mechanics and technicians who need a single, durable impact socket for high-torque applications. The SID22122 model uses a chromium-vanadium alloy with a manganese phosphate finish for corrosion resistance.

Thermals Noise Power Draw

As a non-powered hand tool, this socket generates no heat, produces no noise and draws no electrical power during use. Its performance depends entirely on the impact wrench or driver supplying the torque. The steel construction handles repeated high-impact cycles without deformation.

22 mm 6-Point Shallow Fit

The 22 mm hex opening with radiused corners grips fastener flats to prevent round-off. The shallow length and full-depth interior well suit tight clearances while maintaining full engagement. Buyers needing a deep-well socket or a different drive size will need another part.

Highlights

  • Dual size markings for quick identification
  • Full-length well improves fastener engagement
  • Compatible with friction-ring or detent-pin anvils
  • Radiused corners prevent fastener round-off
  • 50BV30 Cr-V steel with phosphate coating

Specifications

TypeO-Rings, X-Rings & Cord Stock
BrandDeWalt
ModelHand Rivet Nut Setter Kit
MaterialSteel
Selling UnitBox
Item Count1 pack
Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Standards/CertificationsADA Compliant
Part NumberSID22122

Questions about this item

How do I install the 1/2 inch drive 22 mm socket on my impact wrench, and what step is often missed?

Slide the socket onto the anvil until the detent pin clicks into the hole or the friction ring seats fully; the missed step is verifying the pin or ring is engaged before applying torque.

What maintenance or replacement will the 22 mm impact socket need over time?

Inspect the manganese phosphate coating for wear and the 6-point interior for rounding; replace the socket if the drive square cracks or the walls deform.

What limit appears first when the 22 mm socket is used continuously on a high-torque impact gun?

The 50BV30 chromium-vanadium alloy absorbs repeated shock, but the manganese phosphate finish will wear off before the steel yields under sustained heavy use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.