We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit USB 3.0 Extension Cable Type A Male to Female 6.56 ft 10373

SKU CH-WQ8S-5YMRB

Extends USB 3.0 connections by 6.56 ft with 5 Gbps transfer speed and foil-and-braid shielding

  • TypeUSB Extension Cable, USB 3.0 High Speed Extender Cord Type A
  • Connector TypeUSB Extension Cable, USB 3.0 High Speed Extender Cord Type A
  • ColorBlack
  • Cable Length6.56 ft. (2.0m)
  • Length< 12 ft.
  • Connector Number2
  • Extends USB connections by 6.56 ft for flexible device placement
  • Supports 5 Gbps data transfer, ten times faster than USB 2.0
  • Gold-plated connectors rated for over 10000 insertion cycles
  • Foil and braid shielding blocks EMI and RFI interference
  • Backward compatible with USB 2.0, 1.1 and 1.0 devices

Extension cable for USB 3.0 devices

This Type A male-to-female cable adds 6.56 ft of reach for peripherals such as VR headsets, consoles, flash drives, hard drives, keyboards, printers and scanners. It works with USB 3.0, 2.0, 1.1 and 1.0 hosts and requires no driver installation. The connectors are gold-plated and rated for more than 10000 insertions.

Sustained throughput and shielding

Copper conductors with foil and braid shielding protect the signal from EMI and RFI interference during long transfers. The USB 3.0 link runs at up to 5Gbps when both ends support the standard, falling back to 480 Mbps on USB 2.0 ports. The braided metal wire core keeps the cable flexible while resisting pull and drag.

Length and backward-compatibility limits

At 6.56 ft the cable stays within the practical range for USB 3.0 signalling without an active repeater. Performance is limited by the host controller; a USB 2.0 port will cap throughput at 480 Mbps regardless of the cable rating. The PVC jacket resists abrasion but the assembly is not rated for in-wall or outdoor use.

Highlights

  • Extends USB connections by 6.56 ft for flexible device placement
  • Supports 5 Gbps data transfer, ten times faster than USB 2.0
  • Gold-plated connectors rated for over 10000 insertion cycles
  • Foil and braid shielding blocks EMI and RFI interference
  • Backward compatible with USB 2.0, 1.1 and 1.0 devices

Specifications

Brandugreen
ModelUSB Extension Cable, USB 3.0 High Speed Extender Cord Type A Male to A Female
TypeUSB Extension Cable, USB 3.0 High Speed Extender Cord Type A Male to A Female
Connector TypeUSB Extension Cable, USB 3.0 High Speed Extender Cord Type A Male to A Female
ColorBlack
Cable Length6.56 ft. (2.0m)
Length< 12 ft.
Connector Number2
Connector DetailUSB 3.0 Extension Cable
Terminal GenderMale to Female
SpecificationsUSB 3.0 Extension Cable USB 3.0 High Speed Extender Cord Type A Male to A Female
ShieldingYes
ConductorCopper Conductor
FeaturesUSB 3.0 High Speed Extender Cord Type A Male to A Female

Questions about this item

Will the 6.56 ft length cause signal loss or extra heat when I run a hard drive all day?

The cable uses copper conductors with foil and braid shielding to maintain the 5 Gbps USB 3.0 rate over 6.56 ft without active electronics, so it adds no measurable heat.

Does my computer need a USB 3.0 Type-A port for this extender to work?

Yes, the male plug is USB 3.0 Type-A; the host must provide a matching Type-A port, though the cable will fall back to USB 2.0 or 1.1 speeds if only those ports are available.

Can I keep using my USB 2.0 printer and scanner through this 3.0 extension cable?

The cable is backward compatible with USB 2.0, 1.1 and 1.0 devices, so older printers and scanners will operate at their native speeds without drivers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.