TeKit
TeKit USB 3.0 A Male to B Male Cable 1.5 m Blue
A 1.5 m USB 3.0 cable with A and B male connectors for printers or hard-drive enclosures, backwards compatible with USB 2.0 and 1.1
- TypeUSB 3.0 A Male to B Male Cable M-M printer cable computer ca
- Connector TypeUSB 3.0 A Male to B Male Cable M-M printer cable computer ca
- ColorBlue
- Cable Length4.92 ft. (1.5m)
- Length< 6 ft.
- Connector Number2
- USB 3.0 speeds up to 5 Gbit/s for fast printer and drive transfers
- 5 m length reaches devices behind desks or in racks
- Blue jacket makes the cable easy to spot among other wires
- Backward compatible with USB 2.0 and USB 1.1 ports
- Male-to-male A-to-B connectors fit standard printer and enclosure ports
TeKit USB 3.0 A Male to B Male Cable
The TeKit USB 3.0 A Male to B Male Cable connects USB 3.0 Type-A host ports to USB 3.0 Type-B device ports. It suits users linking printers, scanners or external drive enclosures equipped with a standard Type-B socket. The 1.5 m length bridges typical desk-to-peripheral distances without excess slack. It is not intended for devices that require USB-C, Micro-B or proprietary connectors.
Passive copper construction
The passive copper cable draws no external power and adds negligible heat to the host system. Operation is silent because no active electronics or cooling are present. Power delivery follows the USB 3.0 specification for bus-powered peripherals. No driver installation is required on modern operating systems.
Sustained transfer stability
Under continuous data movement the link remains at USB 3.0 signalling rates without thermal throttling. Backward compatibility with USB 2.0 and USB 1.1 hosts or devices is maintained throughout extended sessions. Signal integrity is preserved across the full 4.92 ft span for reliable bulk-endpoint traffic. The fixed 1.5 m length cannot be extended without an active repeater.
Highlights
- USB 3.0 speeds up to 5 Gbit/s for fast printer and drive transfers
- 5 m length reaches devices behind desks or in racks
- Blue jacket makes the cable easy to spot among other wires
- Backward compatible with USB 2.0 and USB 1.1 ports
- Male-to-male A-to-B connectors fit standard printer and enclosure ports
Specifications
| Brand | TeKit |
|---|---|
| Model | NTRC100221W |
| Type | USB 3.0 A Male to B Male Cable M-M printer cable computer cable |
| Connector Type | USB 3.0 A Male to B Male Cable M-M printer cable computer cable |
| Color | Blue |
| Cable Length | 4.92 ft. (1.5m) |
| Length | < 6 ft. |
| Connector Number | 2 |
| Connector Detail | USB 3.0 A Male to B Male Cable M-M printer cable computer cable |
| Terminal Gender | Male to Male |
| Specifications | USB 3.0 A Male to B Male Cable M-M printer cable computer cable |
| Features | USB 3.0 A Male to B Male Cable M-M printer cable computer cable |
Questions about this item
How do I plug the USB 3.0 A male and B male ends into my computer and printer correctly?
Insert the flat rectangular USB 3.0 Type-A connector into any USB 3.0 or USB 2.0 port on the computer, then push the square USB 3.0 Type-B connector firmly into the printer or external drive until it clicks.
Will the cable jacket or connectors wear out and need replacement after repeated use?
The moulded strain-relief boots on both ends protect the 1.5 m cable from bending stress; under normal office use the assembly lasts the life of the connected devices.
What is the maximum data rate I can sustain when transferring large files to a USB 3.0 hard-drive enclosure?
The cable supports the USB 3.0 specification up to 5 Gbps, so sustained throughput is limited by the drive enclosure and host controller rather than the 1.5 m link itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


