TeKit
TeKit USB 3.0 20-Pin Female to USB 2.0 9-Pin Male Adapter Cable
Connects a USB 3.0 20-pin front-panel header to a USB 2.0 9-pin motherboard header at 480 Mbps
- TypeUSB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0
- Connector TypeUSB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0
- ColorBlack
- Connector Number2
- Connector DetailUSB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0
- Terminal GenderFemale to Male
- Connect USB 3.0 front-panel devices to USB 2.0 motherboard headers
- 12 cm cable fits tight case spaces without clutter
- Shielded construction reduces signal interference for reliable data transfer
- Supports 480 Mbps throughput on connected USB 3.0 devices
- 20-pin female to 9-pin male adapter enables legacy motherboard compatibility
USB 3.0 20-pin to USB 2.0 9-pin adapter
This adapter cable connects a USB 3.0 20-pin front-panel header to a motherboard USB 2.0 9-pin header. It suits builders whose chassis has a newer front-panel connector but whose board only offers the older header. The 12 cm black cable is shielded and carries two connectors. Data throughput is limited to 480 Mbps when a USB 3.0 device is attached.
Speed limited to USB 2.0 rates
The cable physically bridges the 19-pin USB 3.0 plug to the 9-pin USB 2.0 socket, so SuperSpeed lanes remain unused. Any connected device will operate at High-Speed 480 Mbps instead of the 5 Gbps the front panel could otherwise deliver. No driver or software is required; the motherboard simply negotiates the slower link. This is a passive mechanical and electrical conversion only.
Simple header installation
Alignment keys on both headers prevent reversed insertion, so the cable plugs in one way. The short 12 cm length reduces clutter but can strain if the motherboard header sits far from the front-panel cut-out. Ensure the 9-pin header on the board is a standard USB 2.0 front-panel type; proprietary or powered headers will not mate correctly.
Highlights
- Connect USB 3.0 front-panel devices to USB 2.0 motherboard headers
- 12 cm cable fits tight case spaces without clutter
- Shielded construction reduces signal interference for reliable data transfer
- Supports 480 Mbps throughput on connected USB 3.0 devices
- 20-pin female to 9-pin male adapter enables legacy motherboard compatibility
Specifications
| Brand | Tekit |
|---|---|
| Type | USB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0 Male Motherboard Adapter Converter Cable |
| Connector Type | USB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0 Male Motherboard Adapter Converter Cable |
| Color | Black |
| Connector Number | 2 |
| Connector Detail | USB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0 Male Motherboard Adapter Converter Cable |
| Terminal Gender | Female to Male |
| Specifications | USB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0 Male Motherboard Adapter Converter Cable |
| Shielding | Yes |
| Features | USB Motherboard Connector,20Pin USB3.0 Female to 9Pin USB2.0 Male Motherboard Adapter Converter Cable |
| Electrical Outlet Plug Type | Plug Type “A” (USA, Canada, Mexico, Japan) |
Questions about this item
Will the 20-pin USB 3.0 female connector or the 12 cm cable need periodic replacement?
The adapter has no moving parts; the shielded 12 cm cable and 20-pin female connector are rated for the life of the build unless physically damaged.
What limits sustained throughput when a USB 3.0 device runs through this 9-pin USB 2.0 header?
The 9-pin USB 2.0 header caps the link at 480 Mbps, so that ceiling appears before any cable-length or shielding limit.
Does the adapter add noticeable heat or fan noise when the front-panel ports run all day?
It is a passive 19-pin to 9-pin cable with no active electronics, so it generates no measurable heat and produces zero acoustic noise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


