We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat cable with two blue USB 3.0 ports on a screw-mount panel and a 20-pin motherboard header, 100 cm long

TeKit

TeKit TK2UTMC 2 Port USB 3.0 Female Screw Panel Mount to Motherboard 20 Pin Cable 100cm

SKU CH-SBNS-VY7V3

Adds two screw-mount USB 3.0 Type-A ports to a motherboard 20-pin header using a 100 cm shielded copper cable with 22 mm hole spacing

  • Type2 Port USB 3.0 A Female Screw Panel Mount to Motherboard 20
  • Connector Type2 Port USB 3.0 A Female to Motherboard 20 Pin
  • ColorBlack & Blue
  • Length3.3ft/100cm
  • Connector Number3
  • Connector Detail2 Port USB 3.0 A Female to Motherboard 20 Pin
  • Add two USB 3.0 ports to any panel with screw-mount holes spaced 22 mm apart
  • Connect directly to a motherboard 20-pin header using the flat 100 cm cable
  • Shielded copper conductors protect signal integrity for reliable 3.0 speeds
  • Flat black-and-blue cable fits tight case routes without blocking airflow
  • Dual Type-A female connectors give instant front-panel access for peripherals

TeKit TK2UTMC dual USB 3.0 panel cable

This cable adds two USB 3.0 Type-A ports to a PC case by connecting them to a motherboard 20-pin header. The female ports feature screw-mount holes spaced at 22 mm or .87 inch for secure panel installation. It suits builders who need front or side-panel USB access without occupying rear I/O slots. The flat 100 cm cable uses copper conductors with shielding for reliable data transfer.

Panel mounting and header connection

The USB 3.0 female ends screw directly into a panel using the 22 mm hole spacing, simplifying installation in custom or replacement case panels. The single 20-pin motherboard header plugs into the standard internal USB 3.0 connector on the board. A common issue is misaligning the keyed header pins, which can bend pins or prevent the system from posting. The flat cable design helps routing but offers limited slack at 100 cm total length.

Builders adding front-panel USB 3.0 ports

This product suits enthusiasts upgrading older cases or building custom enclosures that lack native USB 3.0 front ports. It provides exactly two Type-A connections from one internal header. Builders needing more than two ports, internal device connections, or a longer cable run for full-tower layouts should look at alternatives. The fixed 100 cm length may not reach bottom-mounted headers in larger chassis.

Highlights

  • Add two USB 3.0 ports to any panel with screw-mount holes spaced 22 mm apart
  • Connect directly to a motherboard 20-pin header using the flat 100 cm cable
  • Shielded copper conductors protect signal integrity for reliable 3.0 speeds
  • Flat black-and-blue cable fits tight case routes without blocking airflow
  • Dual Type-A female connectors give instant front-panel access for peripherals

Specifications

BrandTekit
ModelTK2UTMC
Type2 Port USB 3.0 A Female Screw Panel Mount to Motherboard 20 Pin Flat Cable Cord
Connector Type2 Port USB 3.0 A Female to Motherboard 20 Pin
ColorBlack & Blue
Length3.3ft/100cm
Connector Number3
Connector Detail2 Port USB 3.0 A Female to Motherboard 20 Pin
Terminal GenderFemale to Male
Specifications2 x USB3.0 Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20Pin Cable PC Case cable
ShieldingYes
ConductorCopper Conductor
Features2 x USB3.0 Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20Pin Cable PC Case cable
Electrical Outlet Plug TypePlug Type “A” (USA, Canada, Mexico, Japan)

Questions about this item

How can I verify the TeKit TK2UTMC cable is working correctly after connecting it to the motherboard 20-pin header?

Connect USB 3.0 devices to both female ports and confirm they operate at USB 3.0 speeds; the shielded copper conductor and secure screw mount ensure a stable link.

What is included in the package and do I need any extra parts for installation?

The box contains one dual USB 3.0 to 20-pin cable; you only need a motherboard with a spare 20-pin header and a panel cut-out matching the 22 mm screw-hole spacing.

Which cable length should I choose for my build?

This model is the 100 cm (3.3 ft) version; the alternative 80 cm (2.6 ft) variant is listed separately if a shorter run suits your case layout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.