We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black internal cable with 18-pin SATA Express, 15-pin power and 29-pin SAS connectors, 30cm long

TeKit

TeKit SFF-8639 SATA 3.2 Express 18pin & 15Pin Power to SFF-8482 SAS 29pin Data Raid Cable 30cm

SKU CH-4WAZ-BDERQ

Connects an SSD with a SATA Express port to a host SATA Express port using an 18-pin data, 15-pin power and 29-pin SAS connector over 30 cm of shielded 26 AWG cable

  • TypeSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF
  • ColorBlack
  • Length< 1"
  • SpecificationsSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF
  • Connector Number3
  • Connector DetailSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF
  • Connect SSD via SATA Express 18pin to SAS 29pin
  • Shielded 26 AWG cable reduces signal interference
  • 30 cm length fits compact SFF builds
  • Supports PCIe 2.0 and 3.0 for faster transfers
  • Includes 15-pin SATA power for drive operation

SFF-8639 to SFF-8482 RAID Cable

This 30 cm adapter cable bridges an SFF-8639 SATA Express 18-pin device connector with a 15-pin SATA power plug to an SFF-8482 SAS Express 29-pin host connector. It is built for installers who need to attach a SATA Express SSD to a matching host port inside a workstation or server chassis.

Shielded 26 AWG Construction

The cable uses 26 AWG conductors wrapped in shielding to protect signal integrity across the short run. Three distinct connectors — 18-pin SATA Express, 15-pin SATA power, and 29-pin SAS Express — are moulded in a single black assembly, so routing stays tidy in tight drive bays or backplanes.

PCIe 2.0 or 3.0 Lane Support

Data moves at up to 1 GB/s over PCI Express 2.0 lanes or 2 GB/s over PCI Express 3.0 lanes, with AHCI and NVMe protocol support. The part only works when both the host system and the SSD expose native SATA Express ports; it cannot connect legacy SATA or standard SAS devices.

Highlights

  • Connect SSD via SATA Express 18pin to SAS 29pin
  • Shielded 26 AWG cable reduces signal interference
  • 30 cm length fits compact SFF builds
  • Supports PCIe 2.0 and 3.0 for faster transfers
  • Includes 15-pin SATA power for drive operation

Specifications

BrandTekit
TypeSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF-8482 SAS Express 29pin Data Raid Cable
ColorBlack
Length< 1"
SpecificationsSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF-8482 SAS Express 29pin Data Raid Cable
Connector Number3
Connector DetailSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF-8482 SAS Express 29pin Data Raid Cable
ShieldingYes
FeaturesSFF-8639 SATA 3.2 Express 18pin (7+7+4) & 15Pin Power to SFF-8482 SAS Express 29pin Data Raid Cable
Style1-Pack
Cable Length1 ft.

Questions about this item

What data rate does the SATA 3.2 Express interface on this cable cap at?

The cable supports up to 1 GB/s over PCI Express 2.0 or up to 2 GB/s over PCI Express 3.0, depending on the host port revision.

What connectors and clearance does the 30 cm cable need to fit?

It requires a SATA Express 18-pin (7+7+4) male, a SATA 15-pin power male, and a SFF-8482 SAS 29-pin (15+7+7) male connector; the assembly is about 30 cm long excluding the plugs.

How is the cable installed and which orientation mistake is common?

Connect the 18-pin and 15-pin plugs to the SSD and the 29-pin plug to the motherboard SATA Express port; the keyed 18-pin and 29-pin connectors only seat one way, so forcing them reversed is the typical error.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.