We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue USB 3.0 Type-A male to Mini USB 10-pin B cable, 1.8 m

TeKit

TeKit NTRC100100221W USB 3.0 A Male to Mini USB 10-Pin B Cable 1.8m Black & Blue

SKU CH-WRR9-VEY6C

A SuperSpeed USB 3.0 Type-A male to Mini USB 10-pin B cable, 1.8 metres long, for connecting 2.5-inch hard-disk enclosures and other Mini USB 3.0 devices

  • TypeUSB3.0 MALE TO MINI USB CABLE
  • Connector TypeUSB3.0 MALE TO MINI USB CABLE
  • ColorBlack & Blue
  • Cable Length5.91 ft.
  • Length< 6 ft.
  • Connector Number2
  • SuperSpeed USB 3.0 transfers data faster than USB 2.0
  • 8 m cable length gives flexible desktop placement
  • Mini USB 10-pin B connector fits 2.5-inch hard-disk enclosures
  • Male-to-male design links host and device directly
  • Black and blue jacket aids quick cable identification

USB 3.0 Type-A to Mini USB 10-Pin B cable

This TeKit cable connects a USB 3.0 Type-A host port to a Mini USB 10-pin B device. It is built for external 2.5-inch hard drive enclosures and other peripherals that use the Mini USB 3.0 interface. The 1.8 metre length suits desktop and laptop setups.

Check your device port before ordering

The Mini USB connector fits only USB 3.0 Mini-B ports, not the older USB 2.0 Mini-B sockets found on many cameras or MP3 players. Verify that your enclosure or device specifies a 10-pin Mini USB 3.0 port. A standard USB 3.0 Type-A port on the host side is required for SuperSpeed operation.

Sustained transfer performance

The cable supports USB 3.0 SuperSpeed data rates for continuous reads and writes to mechanical drives. Signal integrity over the 1.8 metre run keeps throughput stable during long backup or imaging sessions. No active electronics are present, so performance depends on the host controller and drive capabilities.

Highlights

  • SuperSpeed USB 3.0 transfers data faster than USB 2.0
  • 8 m cable length gives flexible desktop placement
  • Mini USB 10-pin B connector fits 2.5-inch hard-disk enclosures
  • Male-to-male design links host and device directly
  • Black and blue jacket aids quick cable identification

Specifications

BrandTeKit
ModelNTRC100100221W
TypeUSB3.0 MALE TO MINI USB CABLE
Connector TypeUSB3.0 MALE TO MINI USB CABLE
ColorBlack & Blue
Cable Length5.91 ft.
Length< 6 ft.
Connector Number2
Connector DetailUSB3.0 MALE TO MINI USB CABLE
Terminal GenderMale to Male
SpecificationsSuperSpeed USB 3.0 Type-A Male to Mini USB 10-Pin B Cable
FeaturesSuperSpeed USB 3.0 Type-A Male to Mini USB 10-Pin B Cable

Questions about this item

Does the TeKit NTRC100100221W cable include any adapters or need separate drivers?

The cable is a single 1.8 m USB 3.0 Type-A male to Mini USB 10-Pin B male assembly with two connectors. No adapters or drivers are included.

The specs list 1.5 m and 1.8 m lengths — which one is correct?

The manufacturer highlights and detailed description state 1.5 m (5 ft), while the specification table shows 5.91 ft (1.8 m). Both figures refer to the same cable.

Will the SuperSpeed USB 3.0 rating deliver 3.0 speeds on my 2.5-inch external hard drive enclosure?

The cable supports SuperSpeed USB 3.0 transfer rates when connected to a USB 3.0 host port and a device with a Mini USB 10-Pin B 3.0 port. On USB 2.0 ports it falls back to 2.0 speeds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.