TeKit
TeKit NTRACA0090 3-Pin Female to 2×3-Pin Male Power Splitter Cord 1 ft Black & Blood Red
A 3-pin female to dual 3-pin male Y-splitter cable connects two case fans to one motherboard header, 1 ft long in black and blood red
- Type3-Pin Female to 2 x 3-Pin Male Computer Case Fan Y-Splitter
- ColorBlack & Blood Red
- Length1 ft.
- Connector Number3
- Connector Detail3-Pin Female to 2 x 3-Pin Male Computer Case Fan Y-Splitter
- Terminal GenderFemale to Male
- Splits one 3-pin fan header into two connectors
- 1 ft length suits compact case routing
- Black and Blood Red colour matches build themes
- Female-to-male layout connects directly to motherboard header
- Three connectors total for dual-fan power distribution
3-Pin Fan Y-Splitter Cable
This TeKit NTRACA0090 adapter converts a single 3-pin female header into two 3-pin male connectors. It lets you power two case fans from one motherboard or controller header. The cable is finished in black and blood red and measures one foot in length.
Practical limits of the 3-pin interface
A 3-pin connection supplies power and ground but carries only a tachometer signal back to the board. Both attached fans will run at the same voltage, so independent speed control is not possible. The motherboard reads a combined RPM signal that may not reflect either fan accurately. PWM control requires a 4-pin header and is not supported by this splitter.
Installation notes
Each connector is keyed to prevent reverse insertion, so alignment is straightforward. Route the short one-foot lead carefully to avoid tension on the header pins. A common issue is the motherboard reporting an averaged or erratic speed reading because it receives two tachometer signals on one pin.
Highlights
- Splits one 3-pin fan header into two connectors
- 1 ft length suits compact case routing
- Black and Blood Red colour matches build themes
- Female-to-male layout connects directly to motherboard header
- Three connectors total for dual-fan power distribution
Specifications
| Brand | TeKit |
|---|---|
| Model | NTRACA0090 |
| Type | 3-Pin Female to 2 x 3-Pin Male Computer Case Fan Y-Splitter Power Connector Adapter |
| Color | Black & Blood Red |
| Length | 1 ft. |
| Connector Number | 3 |
| Connector Detail | 3-Pin Female to 2 x 3-Pin Male Computer Case Fan Y-Splitter Power Connector Adapter |
| Terminal Gender | Female to Male |
| Specifications | 3-Pin Female to 2 x 3-Pin Male Computer Case Fan Y-Splitter Power Connector Adapter |
| Features | 3-Pin Female to 2 x 3-Pin Male Computer Case Fan Y-Splitter Power Connector Adapter |
Questions about this item
Should I choose this one-foot splitter or look for a longer version?
This model is only offered in a one-foot length, so choose it when the motherboard header or fan hub sits close to the two case fans; if you need more reach, a different cable is required.
What does the 3-pin layout mean once the splitter is installed in my PC?
Each 3-pin connector carries power, ground and a tachometer signal, so both fans will report speed to the motherboard while sharing the same voltage control.
How does the 3-pin interface limit fan control in practice?
Voltage regulation is the only control method available on 3-pin headers, so both fans will ramp together and cannot use PWM duty-cycle signals.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115473BTC
In stock
