We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue industrial-grade NEMA 5-20P male plug with brass blades and nylon body

TeKit

TeKit NEMA 5-20P Male Plug 20A 125V 60Hz gender changer

SKU CH-N5PH-V281B

Industrial-grade 20 A 125 V NEMA 5-20P male plug with nylon housing, brass contacts, screw-down strain relief and internal wiring chambers, UL listed and CSA certified

  • ColorBlue
  • Changer TypeTekit NEMA 5-20P Male Plug,Industrial Grade 20A 125V Straigh
  • FeaturesTekit NEMA 5-20P Male Plug,Industrial Grade 20A 125V Straigh

Color Blue

  • Nylon housing resists impact, abrasion and chemicals
  • Brass blades and contacts improve conductivity and lower resistance
  • Screw-down strain relief locks the cable securely in place
  • Internal wiring chambers isolate conductors to prevent arcing and flashover
  • UL Listed and CSA Certified for safety compliance

Industrial Grade Power Plug

This TeKit NEMA 5-20P male plug is a heavy-duty grounding connector rated at 20 amps and 125 volts for 60 Hz supplies. Its nylon housing resists impact, abrasion and chemicals while brass blades ensure low-resistance conductivity. A screw-down strain relief locks the cable securely and internal wiring chambers isolate conductors to prevent arcing.

For Equipment Requiring 20-Amp Supply

It suits installers replacing a cord-end on industrial or commercial equipment that draws up to 20 amps on a 125-volt circuit. UL listing and CSA certification support code-compliant installations. It is not suitable for devices that require a different pin configuration, a higher voltage rating or a receptacle rather than a plug.

NEMA 5-20P 20A 125V Rating

The single specification that determines fit is the NEMA 5-20P designation, meaning a 20-amp, 125-volt, 2-pole, 3-wire straight-blade plug. Only select this part when the equipment nameplate and the supply receptacle both call for that exact configuration.

Highlights

  • Nylon housing resists impact, abrasion and chemicals
  • Brass blades and contacts improve conductivity and lower resistance
  • Screw-down strain relief locks the cable securely in place
  • Internal wiring chambers isolate conductors to prevent arcing and flashover
  • UL Listed and CSA Certified for safety compliance

Specifications

BrandTEKIT
Model5-20P
ColorBlue
Changer TypeTekit NEMA 5-20P Male Plug,Industrial Grade 20A 125V Straight Blade Plug, 60Hz, 2-Pole, 3-Wire, Grounding Connector Cord Outlet Replacement, UL Listed(5-20P)
FeaturesTekit NEMA 5-20P Male Plug,Industrial Grade 20A 125V Straight Blade Plug, 60Hz, 2-Pole, 3-Wire, Grounding Connector Cord Outlet Replacement, UL Listed(5-20P)

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes with the TeKit NEMA 5-20P plug and what else is needed to use it?

The package contains the male plug only. You must supply your own cable and wire it to the internal terminals using the screw-down strain relief.

Which version of this plug should I choose for a 20 A 125 V circuit?

This model is rated 20 A at 125 V, 60 Hz, 2-pole 3-wire grounding, and carries UL and CSA listings, so it matches that circuit directly.

What does the 20 A rating mean when the plug is installed on equipment?

It allows continuous loads up to 20 amps at 125 volts; the brass blades and internal wiring chambers keep resistance low and prevent arcing under full load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.