TeKit
TeKit JD0126 USB-C to DC 4.8x1.7mm 18.5V 3.5A Cable 1.5m
Charges compatible HP Compaq laptops from a USB-C PD power source using a 4.8×1.7 mm DC plug at 18.5 V 3.5 A with a 1.5 m cable
- TypeCable Kit
- Connector TypeUSB Type-C PD Charging Cable Cord Dc 4.8x1.7mm Male Plug Con
- ColorBlack
- Cable Length5ft
- Connector Number2
- Terminal GenderMale to Male
- Charge HP laptops via USB-C PD using 4.8x1.7mm DC plug
- Delivers 18.5V at 3.5A with 90W+ PD charger
- 5m cable length gives flexible desk placement
- Reversible USB-C connector inserts either way up
- Charging-only cable — no data sync function
USB-C PD to 4.8×1.7 mm DC cable
This 1.5 metre cable converts a USB-C Power Delivery source into an 18.5 V 3.5 A barrel output for compatible HP Compaq laptops. It carries a male USB-C plug on one end and a 4.8 mm by 1.7 mm male DC connector on the other. The cable is intended solely for charging and does not support data transfer.
Thermals noise and power draw
The assembly is a passive cable with no active electronics, so it generates no audible noise and adds negligible heat during normal charging. Power delivery depends entirely on the attached USB-C PD charger, which must supply at least 90 W to reach the rated 18.5 V 3.5 A output. A 65 W source will operate but at reduced charging speed.
Sustained load behaviour
Under continuous use the cable maintains a stable connection provided the PD charger can sustain the required voltage and current. Voltage drop across the 1.5 metre length is minimal for the specified 3.5 A load. The connector fit remains secure on supported HP Compaq 500 510 520 530 540 550 620 625 and CQ515 models. Buyers needing data sync or a different barrel size cannot use this cable.
Highlights
- Charge HP laptops via USB-C PD using 4.8x1.7mm DC plug
- Delivers 18.5V at 3.5A with 90W+ PD charger
- 5m cable length gives flexible desk placement
- Reversible USB-C connector inserts either way up
- Charging-only cable — no data sync function
Specifications
| Brand | Tekit |
|---|---|
| Model | JD0126 |
| Type | Cable Kit |
| Connector Type | USB Type-C PD Charging Cable Cord Dc 4.8x1.7mm Male Plug Converter 18.5V 3.5A Laptop Adapter for Hp Compaq 500 510 520 530 540 550 |
| Color | Black |
| Cable Length | 5ft |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Specifications | USB Type-C PD Charging Cable Cord Dc 4.8x1.7mm Male Plug Converter 18.5V 3.5A Laptop Adapter for Hp Compaq 500 510 520 530 540 550 |
Questions about this item
How do I install the 4.8x1.7mm DC plug on my HP Compaq 500 series laptop and what step is often missed?
Plug the USB-C end into a 90W or higher PD charger, then insert the 4.8mm by 1.7mm barrel into the laptop's DC jack; the step often missed is verifying the charger delivers at least 90W before connecting.
What maintenance or replacement will the JD0126 cable need after extended use?
Inspect the 1.5m cable jacket and both male connectors for fraying or bent pins; replace the cable if the 4.8x1.7mm plug becomes loose in the port or the USB-C end no longer negotiates 18.5V at 3.5A.
What limit appears first when the cable runs at full 18.5V 3.5A output for long periods?
The 1.5m length and conductor gauge limit sustained 65W to 90W delivery; voltage drop along the cable becomes the first bottleneck under continuous maximum load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



