TeKit
TeKit IEC 320 C14 Male to 3× C13 Female 5-15R Splitter Cord 1 ft
Splits one C14 inlet into three C13 outlets rated 10 A at 125 V or 2.5 A at 250 V, shielded copper conductors, 1 ft long
- TypeIEC 320 Single C14 Male to 3X C13 Female 5-15R Short Power S
- ColorBlack
- Length1 ft.
- Connector Number4
- Connector DetailIEC 320 Single C14 Male to 3X C13 Female 5-15R Short Power S
- Terminal GenderMale to Female
- Powers three devices from one C14 inlet
- Rated 10 A at 125 V AC for safe operation
- 1 ft length keeps rack wiring tidy
- Copper conductors with shielding ensure clean power delivery
- Splits one C14 male into three C13 female sockets
One-metre splitter for three C13 devices
This one-foot cord turns a single IEC 320 C14 inlet into three C13 outlets, letting rack-mounted servers, UPS units or PDUs feed multiple power supplies from one branch circuit. The black cable uses copper conductors and includes shielding for EMI protection in dense equipment cabinets. Rated for 10 A at 125 V AC or 2.5 A at 250 V AC, it suits standard IT gear within those limits.
Replaces loose daisy-chains or bulky PDU strips
Installers who currently run separate cords from a UPS to each server can consolidate to one whip, reducing cable count and improving airflow in shallow racks. The jump is worth it when the combined draw stays under the 10 A rating and the rack depth leaves no room for a full-width power strip. Builders needing more than three outlets or higher per-outlet current must look elsewhere.
C13/C14 standard caps usable current
The IEC 320 interface limits the assembly to the 10 A / 125 V or 2.5 A / 250 V ratings printed on the connectors, so total load cannot exceed those values regardless of upstream capacity. The 5-15R-style sockets accept NEMA 5-15 plugs, but the cord itself does not raise the branch-circuit rating. Users planning loads beyond 10 A must use a differently rated distribution method.
Highlights
- Powers three devices from one C14 inlet
- Rated 10 A at 125 V AC for safe operation
- 1 ft length keeps rack wiring tidy
- Copper conductors with shielding ensure clean power delivery
- Splits one C14 male into three C13 female sockets
Specifications
| Brand | Tekit |
|---|---|
| Type | IEC 320 Single C14 Male to 3X C13 Female 5-15R Short Power Splitter Adapter Cable Cord |
| Color | Black |
| Length | 1 ft. |
| Connector Number | 4 |
| Connector Detail | IEC 320 Single C14 Male to 3X C13 Female 5-15R Short Power Splitter Adapter Cable Cord |
| Terminal Gender | Male to Female |
| Specifications | IEC 320 Single C14 Male to 3X C13 Female 5-15R Short Power Splitter Adapter Cable Cord |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | IEC 320 Single C14 Male to 3X C13 Female 5-15R Short Power Splitter Adapter Cable Cord |
Questions about this item
How much clearance does the 1 ft splitter need behind a rack-mounted C14 inlet?
The cord is 1 ft long with a single C14 plug and three C13 sockets, so allow roughly 30 cm depth for the splitter body and cable bend radius behind the inlet.
What is the correct way to seat the C14 plug so all three 5-15R outlets receive power?
Push the C14 male plug fully into the IEC 320 C14 inlet until it clicks; a partial insert leaves one or more C13 branches unpowered.
When should I replace the splitter if the copper conductors show wear?
Replace the cord if the black jacket is cracked, the C14 or C13 pins are discoloured, or the 10 A 125 V / 2.5 A 250 V rating label becomes illegible.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115819BTC
In stock
