We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter power cord with C14 male plug to two C13 female sockets 6.6ft long

TeKit

TeKit C14 to Dual C13 Y Splitter Power Cord 6.6ft 18AWG 10A 250V

SKU CH-JYQ6-NRM87

Splits one C14 inlet into two C13 outlets, 6.6 ft long, 18 AWG copper, rated 10 A 250 V

  • TypeSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Ada
  • ColorBlack
  • Length6.6ft/2m
  • Connector Number3
  • Connector DetailSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Ada
  • Terminal GenderSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Ada

Length 6.6 ft.

  • Connect two C13 devices from one C14 inlet
  • 18AWG copper conductors rated 10A 250V
  • 6ft length reaches rack-mounted equipment
  • Oxygen-free pure copper ensures reliable power delivery
  • Single cable replaces two separate power cords

Power Splitter for C14 Devices

This TeKit Y-splitter cable converts a single IEC320 C14 male plug into two C13 female sockets. It is built with 18AWG oxygen-free copper conductors and a PVC jacket. The cord measures 6.6ft in length and carries a 10A 250V rating. It suits setups that need to power two devices from one C14 inlet.

Ideal for Dual Peripheral Power

Works well for connecting a computer and monitor, or two rack-mounted units, to a single PDU or UPS outlet. Builders who need more than two C13 connections, or who require a locking connector, should look at other cable types. The fixed Y layout also limits repositioning of individual sockets.

10A 250V Rating Governs Use

The cable is rated for a maximum of 10A at 250V. Verify that the combined draw of both attached devices stays within this limit. Exceeding the rating creates a safety hazard and voids the intended application.

Highlights

  • Connect two C13 devices from one C14 inlet
  • 18AWG copper conductors rated 10A 250V
  • 6ft length reaches rack-mounted equipment
  • Oxygen-free pure copper ensures reliable power delivery
  • Single cable replaces two separate power cords

Specifications

BrandTekit
TypeSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Adapter Cable Cord
ColorBlack
Length6.6ft/2m
Connector Number3
Connector DetailSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Adapter Cable Cord
Terminal GenderSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Adapter Cable Cord
SpecificationsSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Adapter Cable Cord
ConductorCopper Conductor
FeaturesSingle C14 to Dual 5-15R C13 Short Power Y Type Splitter Adapter Cable Cord

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 18 AWG copper cable run warm when both C13 outlets draw close to the 10 A 250 V rating all day?

The cord uses 18 AWG oxygen-free copper rated for 10 A at 250 V; at or near that load it will warm slightly, which is normal for this gauge.

My UPS only has C13 outlets — can I plug this splitter's C14 male plug directly into one of them?

No, the splitter has a C14 male plug that requires a C13 female outlet; a C13-to-C13 cable will not fit.

Will the Y splitter work with older ATX power supplies that still use the standard IEC 320 C14 inlet?

Yes, the C14 male plug matches the standard IEC 320 C14 inlet found on legacy ATX PSUs, so the splitter connects without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.