We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual-band antenna kit with RP-SMA and MHF4 connectors, 20 cm cable, desktop bracket

Teday

Teday Dual Band 5 dBi Antenna Kit RP-SMA MHF4/IPEX 20 cm for M.2 Intel AX200 9260 8265

SKU CH-VGYW-7N8HH

Dual-band external antenna kit with RP-SMA and MHF4/IPEX pigtail cables for M.2 Wi-Fi cards including Intel AX200, 9260, 8265 and 9560

  • TypeAccessories
  • ColorBlack
  • StandardsIEEE 802.11ax/ac/a/b/g/n
  • Wireless Data RatesAC1200 High Gain
  • InterfaceFor M.2 wifi card
  • Frequency Band2.4 GHz / 5 GHz
  • Dual-band coverage for 2.4 GHz and 5 GHz networks
  • 5 dBi gain extends wireless range and signal strength
  • 20 cm pigtail cable connects M.2 cards to RP-SMA antennas
  • Compatible with Intel AX200 9260 8265 9560 and similar NGFF modules
  • Supports IEEE 802.11ax/ac/a/b/g/n standards for AC1200 data rates

Desktop antenna kit for M.2 cards

This kit adds dual-band external antennas to an NGFF M.2 wireless card using IPEX-to-RP-SMA pigtail cables and a mounting bracket. It is aimed at builders who want better reception on a desktop motherboard or PCIe adapter that exposes an M.2 slot. The 20 cm cables reach from the card to rear-panel or bracket-mounted RP-SMA connectors.

Sustained link behaviour with external gain

The 5 dBi dipoles concentrate radiation horizontally, improving signal-to-noise ratio at range compared with onboard antennas. Under continuous load the higher gain reduces retries and keeps throughput steadier on both 2.4 GHz and 5 GHz bands. The cables are short enough to keep insertion loss low during extended sessions.

Practical limits of the M.2 antenna interface

The IPEX MHF4 connectors fit Intel AX200, 9260, 8265, 201, 9560 and similar Broadcom or Atheros NGFF cards, but the kit cannot add antenna ports to cards that lack them. Maximum PHY rate is capped by the card's AC1200 capability and the IEEE 802.11ax/ac/a/b/g/n standards it supports. No Bluetooth or 3G/4G function is provided by the antennas themselves.

Highlights

  • Dual-band coverage for 2.4 GHz and 5 GHz networks
  • 5 dBi gain extends wireless range and signal strength
  • 20 cm pigtail cable connects M.2 cards to RP-SMA antennas
  • Compatible with Intel AX200 9260 8265 9560 and similar NGFF modules
  • Supports IEEE 802.11ax/ac/a/b/g/n standards for AC1200 data rates

Specifications

ModelAntenan
TypeAccessories
ColorBlack
StandardsIEEE 802.11ax/ac/a/b/g/n
Wireless Data RatesAC1200 High Gain
InterfaceFor M.2 wifi card
Frequency Band2.4 GHz / 5 GHz
AntennaDual Band External Antenna

Questions about this item

Will the 5 dBi dual-band antennas add noticeable heat or power draw when the system runs all day?

The antenna kit is passive and adds no heat or power consumption; all RF energy comes from the M.2 card itself.

What must I already own to use this RP-SMA / MHF4-IPEX kit with an Intel AX200 or 9260 card?

You need an NGFF M.2 Wi-Fi card with I-PEX4 connectors and a chassis opening for the RP-SMA bulkhead brackets.

Can I keep my older Intel 8265 or 9560 module and simply swap the antenna cables to this kit?

Yes, the I-PEX4 pigtails fit the 8265 and 9560 NGFF cards, and the 5 dBi antennas cover the same 2.4 GHz and 5 GHz bands.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.