Teamyo
Teamyo USB 3.0 Extension Cable 10 ft USB A to USB A Black
A 10 ft USB 3.0 extension cable with a braided nylon jacket and aluminium connectors rated for 10,000 bends, delivering 5 Gbps data transfer and charging for USB-A devices
- TypeUSB3.0 Extension Cable
- Connector TypeUSB A to USB A
- ColorBlack
- Cable Length10 ft.
- Length10 ft.
- Connector Number1
- Transfer up to 5 Gbps with USB 3.0 speed
- 10 ft cable reaches ports behind desks or across rooms
- Braided nylon jacket resists tangling and daily wear
- Aluminium alloy connectors tested to 10000 bends for long life
- Works instantly with printers, drives, hubs and more — no drivers needed
10 ft USB 3.0 Extension Cable
This USB 3.0 extension cable adds 10 ft of reach between a host and a USB-A peripheral. It suits anyone who needs to bridge a gap behind a desk, across a room or from a sofa without moving the computer or hub. The male-to-female layout keeps the original port orientation while extending the connection for printers, scanners, cameras, flash drives, keyboards, mice, consoles and other USB-A devices.
5 Gbps data rate and braided jacket
The cable supports USB 3.0 transfer speeds up to 5 Gbps when both ends are USB 3.0, falling back to USB 2.0 or USB 1.1 automatically if either device is older. A braided nylon jacket resists tangling and an aluminium alloy connector housing passes a 10000 bend test, so the cable stays supple and intact during daily plugging and routing.
Plug-and-play across Windows, Mac, Linux, Chrome OS
No driver installation is required on any supported operating system; the link enumerates immediately for data sync or charging. The 10 ft length covers 99 percent of typical desktop and living-room layouts, letting you keep a device connected while seated away from the host. If a port is worn or loose, the extended connector can reduce further wear on the original socket.
Highlights
- Transfer up to 5 Gbps with USB 3.0 speed
- 10 ft cable reaches ports behind desks or across rooms
- Braided nylon jacket resists tangling and daily wear
- Aluminium alloy connectors tested to 10000 bends for long life
- Works instantly with printers, drives, hubs and more — no drivers needed
Specifications
| Type | USB3.0 Extension Cable |
|---|---|
| Connector Type | USB A to USB A |
| Color | Black |
| Cable Length | 10 ft. |
| Length | 10 ft. |
| Connector Number | 1 |
Questions about this item
How do I install the 10 ft USB 3.0 extension cable, and what step do people often miss?
Plug the male Type‑A connector into the host port and the female Type‑A end into your device; no driver is required on Windows, Mac OS, Linux or Chrome OS. The step users miss is confirming both ends support USB 3.0 to reach 5 Gbps.
What maintenance or replacement will the braided 3 metre cable need later?
The nylon braid resists tangling and the aluminium alloy connectors are rated for 10000+ bend cycles, so no routine maintenance is needed; replace only if the connectors become loose or the jacket shows wear.
What limit appears first during sustained high‑speed transfers on this 10 ft extender?
The 5 Gbps USB 3.0 ceiling is the first bottleneck; if either connected device only supports USB 2.0 or 1.1, throughput drops to that lower standard instead.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



