We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal V-belt pulley with single groove and quick detachable bushed bore, silver finish

Tb Wood'S

Tb Wood'S 601B quick detachable bushed bore v-belt 1 groove

SKU CH-27AF-ZSK0X

Quick detachable bushed bore V-belt pulley with one groove for 4L, 5L, A, AX, B, BX belts and SDS bushing

  • TypeSheaves & Pulleys
  • Quick-detach bushing speeds belt changes
  • Fits 4L, 5L, A, AX, B, BX belts
  • 6 in pitch diameter for A-section belts
  • 6 in pitch diameter for B-section belts
  • Compatible with SDS bushings from 1/2 in to 1-15/16 in

601B Quick-Detach V-Belt Sheave

The 601B is a single-groove V-belt sheave that uses a quick-detachable bushed bore for fast mounting and removal. It accepts SDS bushings and covers a bore range of 1/2 in to 1-15/16 in. The unit is built for standard A, AX, B, BX, 4L and 5L belt sections.

Suits drives using A, AX, B, BX.

Builders needing C, CX, 3V, 5V, 3VX or 5VX belt compatibility should look elsewhere. The sheave does not support those sections or pitch diameters. Drives requiring a different bushing style or a multi-groove layout are also not served by this model.

SDS bushing compatibility decides fit

The sheave is machined for an SDS quick-detachable bushing only. If the drive uses a different bushing series or a plain bore, this part will not install. Confirm the bushing type before ordering.

Highlights

  • Quick-detach bushing speeds belt changes
  • Fits 4L, 5L, A, AX, B, BX belts
  • 6 in pitch diameter for A-section belts
  • 6 in pitch diameter for B-section belts
  • Compatible with SDS bushings from 1/2 in to 1-15/16 in

Specifications

TypeSheaves & Pulleys

Questions about this item

What does the 6 in pitch diameter mean once the pulley is on a shaft?

The 6 in pitch diameter for B and BX belts sets the effective drive ratio and belt speed when the pulley is mounted on a shaft.

How does the Quick Detachable SDS bushing interface cap the bore range?

The SDS bushing accepts shafts from 1/2 in to 1-15/16 in, so the pulley can only be mounted within that range.

What does the single groove design need to fit a B-section belt?

One groove matches a single B or BX belt, so the pulley fits drives that use one belt of that cross-section.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.