We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal V-belt pulley with two grooves, quick-detachable bushed bore, 8 inch pitch diameter

Tb Wood'S

Tb Wood'S 5V802 2 Groove V-Belt Pulley

SKU CH-5BAE-M1PGY

Two-groove V-belt pulley with 8-inch pitch diameter for 5V and 5VX belts, accepting 1/2 to 2-1/2 inch quick-detachable bushings

  • TypeSheaves & Pulleys
  • Quick-detachable bushing speeds installation
  • 8 in 5V/5VX pitch diameter matches belt size
  • Two grooves transmit higher torque capacity
  • TB Woods brand built for power transmission
  • New condition ensures full service life

Product Identity

The Tb Wood'S 5V802 is a two-groove V-belt pulley designed for power transmission systems. It accepts Quick Detachable bushings with a bore range of 1/2 in to 2-1/2 in and is built for 5V and 5VX belt sections.

Application Fit

This pulley suits maintenance teams and OEMs standardising on 5V-series belts and QD bushings for rapid change-outs. It is not for drives using A, B, C, 3V, or 8V belt profiles, nor for setups requiring a fixed-bore or taper-lock mounting method.

Pre-Installation Checks

Verify that the driven and driver shafts fall within the 1/2 in to 2-1/2 in bushing range and that the correct QD bushing is on hand. Confirm the belt cross-section is 5V or 5VX and that centre distance allows the 8 in pitch diameter without interference.

Highlights

  • Quick-detachable bushing speeds installation
  • 8 in 5V/5VX pitch diameter matches belt size
  • Two grooves transmit higher torque capacity
  • TB Woods brand built for power transmission
  • New condition ensures full service life

Specifications

TypeSheaves & Pulleys

Questions about this item

What bore size and bushing type does the 5V802 pulley require?

The 5V802 pulley uses a quick-detachable bushed bore that accepts shafts from 1/2 in to 2-1/2 in, so you must already have a compatible QD bushing and shaft in that range.

Can I keep using my existing 5V or 5VX belts with this 8-inch pitch-diameter pulley?

Yes, the 5V802 is designed for 5V and 5VX trade-size belts and its 8-inch pitch diameter matches those belt profiles, so your current belts will fit without change.

How do I verify the pulley is seated and aligned correctly after installation?

After mounting the QD bushing and tightening to the specified torque, check that the pulley runs true with no wobble and that the belt tracks centrally in both grooves under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.