Taymac
Taymac MM410G 1-Gang Weatherproof Cover Gray video accessory
A gray polycarbonate weatherproof cover fits Decora, GFCI, duplex, toggle and single receptacles in horizontal or vertical orientation
- TypeElectrical Boxes & Covers
- ColorGray
- Weatherproof polycarbonate body protects outlets in wet locations
- Horizontal or vertical mounting fits any installation orientation
- Quick-Fit patented keyhole mount speeds up installation time
- cULus listed and NEC compliant for code-approved safety
- Supports Decora, GFCI, duplex, toggle and single receptacles
Taymac MM410G 1-Gang Cover
The Taymac MM410G is a single-gang weatherproof cover designed for horizontal or vertical mounting. It protects Decora, GFCI, duplex, toggle switch and single receptacles in outdoor or damp locations. The gray polycarbonate body meets cULus and NEC standards for safety compliance.
Quick-Fit Keyhole and Knock-Out Base
The patented Quick-Fit keyhole mount allows the cover to be hung on installed screws for easier alignment. The base configuration uses patented knock-out and trade technology for custom fitting to the electrical box. A polyethylene foam gasket seals the enclosure against moisture ingress.
Simple Mounting With Common Pitfalls
Installation is straightforward using the keyhole slots and standard box screws. Ensure the gasket seats evenly and the knock-outs match your conduit entries to maintain the weatherproof seal. Over-tightening screws can crack the polycarbonate body, so apply only enough torque to compress the foam gasket.
Highlights
- Weatherproof polycarbonate body protects outlets in wet locations
- Horizontal or vertical mounting fits any installation orientation
- Quick-Fit patented keyhole mount speeds up installation time
- cULus listed and NEC compliant for code-approved safety
- Supports Decora, GFCI, duplex, toggle and single receptacles
Specifications
| Brand | TAYMAC |
|---|---|
| Type | Electrical Boxes & Covers |
| Color | Gray |
Questions about this item
Will the polycarbonate body or the foam gasket need replacing after years of outdoor exposure?
The cover uses a polycarbonate body and a polyethylene foam gasket; both materials are chosen for weather resistance, so replacement is only needed if physical damage occurs.
What is the first limit reached when the covered receptacle runs at full load continuously?
The cULus listing and NEC compliance mean the assembly is rated for the receptacle's standard ampacity; the cover itself does not impose a lower thermal limit.
Does the gray polycarbonate cover trap heat or add audible noise when the receptacle is used all day?
The cover is a passive enclosure with no moving parts or electronics, so it adds no noise and does not restrict normal heat dissipation from the receptacle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



