Paramount Home Entertainment
Paramount Home Entertainment Airplane! Keepsake
- Keepsakes
$21.99
0.00026368BTC
In stock
Taylor SW01-3Kits WiFi Hygrometer Thermometer 3 Sensors + Base Station
Monitors temperature and humidity at four locations with ±0.5 °C accuracy and sends app alerts when conditions exceed preset limits
- TypeThermometers
- ColorBlack
- Features1*Base Station+3*Temperature Sensor, Modern, Temperature: 0.
- Measurement Range-20 degrees_celsius to 60 degrees_celsius
- Measurement AccuracyTemperature: 0.5?/ Humidity: 1% RH
- Battery Life2 AAA batteries per sensor
- Monitor multiple locations with up to nine sensors supported by one base station
- Receive instant app alerts when temperature or humidity exceed your preset limits
- Check readings hands-free using Alexa or Google Home voice commands
- Outdoor sensors withstand rain and dust with IP65 weather-resistant rating
- View live and historical trends on clear in-app charts for easy analysis
Multi-point monitoring with three sensors
The Taylor SW01-3Kits system includes one base station and three wireless sensors for simultaneous temperature and humidity tracking across multiple locations. It suits homeowners, greenhouse growers or hobbyists who need to compare conditions in rooms, fridges, guitar cases or outdoor spaces from a single app. Up to nine sensors can be paired to the base station for future expansion.
2.4 GHz Wi-Fi and 433 MHz RF limits
The base station connects to a 2.4 GHz Wi-Fi network only; 5 GHz networks are not supported. Sensors talk to the base over 433 MHz RF with an open-air range of 150 metres. Operating range for both units spans -20 to 60 degrees Celsius and 0 to 99 percent relative humidity. Accuracy is ±0.5 degrees for temperature and ±5 percent RH for humidity.
IP65 sensors and USB-powered base
Each sensor carries an IP65 rating, making it weather-resistant for outdoor or damp indoor use such as greenhouses or basements. Sensors run on two AAA batteries each, while the base station draws 5 V / 1 A via USB-DC. The compact base measures 60 by 60 by 20 mm and sensors 71 by 25 by 20 mm, allowing discreet placement on shelves or walls. Voice queries work with Alexa and Google Home.
Highlights
- Monitor multiple locations with up to nine sensors supported by one base station
- Receive instant app alerts when temperature or humidity exceed your preset limits
- Check readings hands-free using Alexa or Google Home voice commands
- Outdoor sensors withstand rain and dust with IP65 weather-resistant rating
- View live and historical trends on clear in-app charts for easy analysis
Specifications
| Brand | Taylor |
|---|---|
| Type | Thermometers |
| Color | Black |
| Part Number | SW01-3Kits |
| Features | 1*Base Station+3*Temperature Sensor, Modern, Temperature: 0.5?/ Humidity: 1% RH |
| Measurement Range | -20 degrees_celsius to 60 degrees_celsius |
| Measurement Accuracy | Temperature: 0.5?/ Humidity: 1% RH |
| Battery Life | 2 AAA batteries per sensor |
| Operating Environment | -20 degrees_celsius / 60 degrees_celsius |
| Weight | 150 grams |
Questions about this item
Should I buy one kit or add extra sensors for more rooms?
The base station supports up to 9 sensors total. This kit includes 3 sensors, so you can add up to 6 more later to cover additional rooms, a greenhouse, or a fridge.
What does the ±0.5 °C accuracy mean when I check the app?
The actual temperature in the room will be within half a degree of the reading shown on your phone, so you can trust the data for fridge monitoring, guitar cases, or greenhouse control.
Does the 2.4 GHz Wi-Fi requirement limit where I can place the base station?
The base station must connect to a 2.4 GHz network; it will not join a 5 GHz band. Place it where that signal reaches, then sensors talk to it over 433 MHz RF up to 150 m in open air.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Medline
Medline BCPE02 feminine care pads extra plus 6.5" x 13.5
- Pads & Sanitary Nap…
$46.99$50.99−8%
0.00056346BTC
In stock
