We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black digital thermometer hygrometer with probe sensor and LCD display

Taylor DAD12216-1 Mini Digital Thermometer Hygrometer with Probe

SKU CH-7Z1T-4R1CB

Measures indoor temperature from -58 to 158 degrees Fahrenheit and humidity from 10 to 99% RH with a probe sensor

  • ColorBlack
  • Measurement Range-58 degrees_fahrenheit to 158 degrees_fahrenheit
  • Battery LifeNo batteries required
  • Operating Environment-58 degrees_fahrenheit / 158 degrees_fahrenheit
  • Monitors temperature from -58 to 158 °F for broad indoor use
  • Tracks humidity between 10 % and 99 % RH for precise climate control
  • Temperature accuracy within ±2 °F ensures reliable readings
  • Humidity accuracy within ±5 % RH supports sensitive environments
  • Probe sensor updates data every 10 seconds for timely monitoring

Mini thermometer hygrometer with probe

The Taylor DAD12216-1 combines temperature and humidity readings in one compact unit. A wired probe lets you measure conditions at a specific spot while the main display stays elsewhere. It suits hobbyists monitoring incubators, reptile enclosures, greenhouse zones or instrument cases where ambient data matters.

Steady ten-second refresh cycle

Readings update every ten seconds, giving a consistent view of gradual shifts rather than a single snapshot. Temperature covers minus 58 to 158 degrees Fahrenheit with a stated accuracy of plus or minus 2. Humidity spans 10 to 99 percent relative humidity with a stated accuracy of plus or minus 5 percent RH. The probe is not water-resistant, so it cannot be submerged or used in aquariums.

Pocket-sized meter with simple mounting

The black plastic body is light enough to sit on a shelf, clip to a terrarium wall or hang from a lanyard. Because the probe cable is fixed, placement is limited by its length and the need to keep the sensor dry. No batteries are required, so there is no cell to replace or leak, but the unit must remain powered by its built-in source to operate.

Highlights

  • Monitors temperature from -58 to 158 °F for broad indoor use
  • Tracks humidity between 10 % and 99 % RH for precise climate control
  • Temperature accuracy within ±2 °F ensures reliable readings
  • Humidity accuracy within ±5 % RH supports sensitive environments
  • Probe sensor updates data every 10 seconds for timely monitoring

Specifications

BrandTaylor
ColorBlack
Part NumberDAD12216-1
Measurement Range-58 degrees_fahrenheit to 158 degrees_fahrenheit
Battery LifeNo batteries required
Operating Environment-58 degrees_fahrenheit / 158 degrees_fahrenheit

Questions about this item

How much power does the Taylor DAD12216-1 draw when monitoring temperature and humidity all day?

The unit requires no batteries, so it draws no power during continuous operation.

What must the buyer already have to start using this thermometer hygrometer?

Nothing extra is needed; the meter arrives ready to read temperature from -58 to 158 and humidity from 10 to 99 %RH.

Will the probe sensor work reliably inside an older incubator or reptile tank the buyer already owns?

Yes, the probe is designed for indoor use in incubators, brooders and reptile tanks, but it is not water-resistant and must not be placed in a fish tank.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.