Taylor
Taylor 9878EPR 5" LCD Waterproof Thermometer -40 to 500°F
Waterproof stem thermometer reads −40 °F to 500 °F with ±1 °F accuracy and a 1.5 mm step-down tip
- TypeEnvironmental & Mechanical
- Waterproof design survives wet kitchen environments
- Metal-detectable body prevents foreign-object contamination in food lines
- ±1 °F accuracy ensures reliable HACCP checks
- NSF certified for direct food-contact safety
- 5 mm step-down tip reaches tight probe points
Precision Food Thermometer
The Taylor 9878EPR is a 5 inch stem thermometer built for commercial kitchens and food-safety professionals who need reliable temperature verification. Its purple plastic body is metal detectable and NSF certified, making it suitable for environments where foreign-object detection is mandatory. The LCD readout covers minus 40 to 500 degrees Fahrenheit with a stated accuracy of plus or minus 1 degree Fahrenheit.
Build Integration
The 1.5 millimeter step-down tip reaches into thin cuts and small containers without a large insertion hole. A pocket sheath clips to an apron or tool roll so the probe stays clean and ready between checks. Waterproof construction allows full immersion washing, reducing cross-contamination risk during busy service.
Bundled Value
The included sheath protects the sensor during storage and transport, extending calibration life. NSF certification satisfies health-department requirements without separate paperwork. A one year manufacturer warranty covers defects in materials or workmanship under normal use.
Highlights
- Waterproof design survives wet kitchen environments
- Metal-detectable body prevents foreign-object contamination in food lines
- ±1 °F accuracy ensures reliable HACCP checks
- NSF certified for direct food-contact safety
- 5 mm step-down tip reaches tight probe points
Specifications
| Brand | TAYLOR |
|---|---|
| Type | Environmental & Mechanical |
Questions about this item
What is the highest temperature the probe can measure?
The probe reads up to 500 °F with a stated accuracy of ±1 °F.
Does the unit generate any heat or noise during continuous use?
No, it is a passive LCD stem thermometer with no fan or active electronics that produce heat or audible noise.
What power source does the thermometer require to operate?
It runs on an internal button-cell battery (included); no external power supply or wiring is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Keson MP301 Measuring Wheel Orange Tubular Steel Frame Metal Spoked Wheel 999Ft
Bazarc Auto Lock Inspection Loop Amber/Blue measurement tool
- Amber/Blue



