We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black OBD2 scanner with angled connector

TAURKENAM

TAURKENAM vLinker MS Bluetooth OBD2 Scanner CH-CAN LS-CAN Black

SKU CH-A363-3WD2Y

Bluetooth OBD2 scanner reads codes and live data on Android, iOS and Windows with CH-CAN and LS-CAN support

  • Typetype
  • Works with Android, iOS and Windows devices
  • Adds CH-CAN and LS-CAN plus single-wire CAN (GMLAN) for wider vehicle coverage
  • Compact design leaves driver legroom clear
  • Auto sleep after 20 minutes drops current to 3 mA
  • Recommended for Multiecuscan, Car Scanner, Harry's LapTimer and AlfaOBD

What this scanner does

The TAURKENAM vLinker MS is a Bluetooth OBD2 adapter that reads and clears fault codes on compatible vehicles. It supports CH-CAN and LS-CAN protocols plus single-wire CAN (GMLAN) for wider model coverage. The device pairs with Android, iOS and Windows devices and works with third-party apps such as Multiecuscan, Car Scanner, Harry's LapTimer and AlfaOBD.

Check before you buy

Verify that your vehicle uses one of the supported CAN protocols; the adapter will not communicate with vehicles that rely on other bus types. Ensure your phone or tablet runs Android, iOS or Windows and that you have a compatible diagnostic app installed. The scanner draws 28 mA while active and drops to 3 mA after about 20 minutes of inactivity, so a healthy vehicle battery is required.

Power and thermal behaviour

During normal use the adapter consumes 28 mA and enters a low-power sleep mode of 3 mA roughly 20 minutes after the engine is turned off. Over-voltage and battery-drain protection circuits guard the vehicle electrical system. The unit has no fan or moving parts, so it runs silently and produces negligible heat inside the cabin.

Highlights

  • Works with Android, iOS and Windows devices
  • Adds CH-CAN and LS-CAN plus single-wire CAN (GMLAN) for wider vehicle coverage
  • Compact design leaves driver legroom clear
  • Auto sleep after 20 minutes drops current to 3 mA
  • Recommended for Multiecuscan, Car Scanner, Harry's LapTimer and AlfaOBD

Specifications

Typetype

Questions about this item

Does the vLinker MS Bluetooth OBD2 scanner come with any cables or software, or do I need to buy them separately?

The adapter connects wirelessly via Bluetooth to your phone or laptop, so no cables are required; compatible third-party apps such as Multiecuscan, Car Scanner, Harry's LapTimer and AlfaOBD are downloaded separately from their respective stores.

Which CAN protocols does this model add over the older vLinker FS, and why does that matter for my vehicle?

It adds CH-CAN, LS-CAN and single-wire CAN (GMLAN) support, expanding coverage to more vehicle models that use those specific bus types.

What does the 28 mA operating current mean for my car battery if I leave the scanner plugged in?

The unit draws 28 mA while active and automatically drops to a 3 mA hibernation current about 20 minutes after the engine is turned off, minimising battery drain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.