We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact USB OBD2 adapter with standard 16-pin connector

TAURKENAM

TAURKENAM vLinker FS USB OBD2 Adapter FORScan HS/MS-CAN Car Electronics Accessory

SKU CH-NXRP-T203N

USB OBD2 adapter for FORScan diagnostics on Ford, Lincoln, Mazda and Mercury vehicles with 18 V programming support and automatic HS/MS-CAN switching

  • Typetype
  • Designed for FORScan on Ford, Lincoln, Mazda, Mercury
  • 18 V FEPS programming voltage for ECU configuration
  • 3 Mbps data rate with 3 MHz baud for live data
  • Automatic switching across HS-CAN, MS-CAN and Ford networks
  • 8192-byte serial buffer and 4128-byte OBD request support

Tailored FORScan Adapter

The TAURKENAM vLinker FS USB OBD2 adapter is built specifically for FORScan software and is recommended by the FORScan team. It targets owners of Ford, Lincoln, Mazda and Mercury vehicles who need reliable access to advanced and hidden vehicle functions. The device supports proprietary Ford CAN bus protocols for comprehensive ECU programming and modification.

USB 2.0 Stability and Speed

A wired USB 2.0 connection eliminates dropped packets, data corruption and network interference during diagnostics. The adapter reaches a 3 Mbps transmission rate with a maximum 3 MHz baud rate, supported by an 8192-byte serial buffer and OBD requests up to 4128 bytes. It supplies FEPS 18V programming voltage output for module configuration tasks.

Automatic Multi-Bus Switching

The adapter automatically switches between HS-CAN, MS-CAN and Ford car networks, allowing FORScan to access all CAN buses simultaneously. This electronic switching unlocks advanced functions without manual intervention. Buyers needing wireless connectivity or support for non-Ford vehicle brands will not find those features here.

Highlights

  • Designed for FORScan on Ford, Lincoln, Mazda, Mercury
  • 18 V FEPS programming voltage for ECU configuration
  • 3 Mbps data rate with 3 MHz baud for live data
  • Automatic switching across HS-CAN, MS-CAN and Ford networks
  • 8192-byte serial buffer and 4128-byte OBD request support

Specifications

Typetype

Questions about this item

How do I connect the vLinker FS USB to my laptop for FORScan, and what step is often missed?

Plug the USB 2.0 connector into the laptop, then the OBD-II plug into the vehicle port, and ensure FORScan is set to the vLinker FS hardware profile so the automatic HS-CAN/MS-CAN switching activates.

Which parts of the vLinker FS USB may need replacement after extended use?

The OBD-II cable and connector endure repeated insertion cycles and under-hood heat, so they are the most likely items to wear out before the internal electronics.

What is the first limit reached during a long ECU programming session with FEPS 18V active?

The adapter maintains a 3 Mbps transmission rate and 8192-byte serial buffer, but sustained high-voltage programming can trigger thermal protection before the 4128-byte request ceiling is hit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.