We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld OBD2 scanner with colour screen and cable

TAURKENAM

TAURKENAM VD10 OBD2 Scanner Car Electronics Accessory

SKU CH-7PMB-E2PRF

An OBD2 scanner that reads and clears fault codes, shows live data, freeze frames and I/M readiness with a built-in database of over 3000 code definitions

  • Typetype
  • Diagnose issues quickly by plugging into the OBDII port
  • Read and clear generic and manufacturer‑specific DTCs with built‑in definitions
  • View live sensor data and freeze‑frame snapshots for deeper analysis
  • Check I/M readiness status before emissions testing
  • New 2024 version with over 3000 code definitions in the database

Essential DIY Diagnostic Tool

The TAURKENAM VD10 OBD2 scanner targets car owners and hobbyists who want to diagnose engine faults without professional equipment. It connects directly to the vehicle OBDII port and reads generic plus manufacturer-specific trouble codes. A built-in database of more than 3000 definitions appears on the TFT screen so users can identify root causes immediately. The 2024 new version adds live data streaming and freeze-frame capture for deeper analysis.

Thermals Noise Power Draw

As a handheld scanner powered entirely through the OBDII port, the device draws minimal current from the vehicle battery during normal use. No internal fan or active cooling is required, so operation stays completely silent in the cabin. Low power consumption means it can remain connected while the engine runs without draining the battery. The compact enclosure stays cool to the touch throughout extended diagnostic sessions.

Upgrade Path And Limits

This unit replaces basic code readers that only display raw numbers without definitions or live parameter viewing. It adds I/M readiness checks and vehicle information retrieval that simpler tools omit. The jump is worth it for owners who want to verify repairs before inspection or monitor sensor data in real time. It does not serve buyers who need bi-directional control, advanced module programming, or coverage for heavy-duty commercial protocols.

Highlights

  • Diagnose issues quickly by plugging into the OBDII port
  • Read and clear generic and manufacturer‑specific DTCs with built‑in definitions
  • View live sensor data and freeze‑frame snapshots for deeper analysis
  • Check I/M readiness status before emissions testing
  • New 2024 version with over 3000 code definitions in the database

Specifications

Typetype

Questions about this item

How do I plug the VD10 into the car OBDII port without damaging the connector pins?

Locate the port under the dashboard, align the VD10 connector keyway with the port notch, and push straight in until it clicks; forcing it at an angle bends the delicate pins.

What part of the VD10 will need replacement after long-term use?

The OBDII connector cable and its strain relief are the only wear items; the scanner body has no battery or moving parts to service.

At what point does the VD10 live data stream start to lag during a long drive?

The refresh rate is fixed by the OBDII protocol bandwidth; after several minutes of continuous polling the screen update slows noticeably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.