TAURKENAM
TAURKENAM Power Extension Cord 6 ft 14 AWG 15 A NEMA 5-15P to 5-15R
A 14 AWG SJT extension cord rated 15 A at 125 V with NEMA 5-15P to 5-15R connectors, UL/CSA approved and RoHS compliant
- Extends reach with NEMA 5-15P to 5-15R connectors
- 14 AWG pure copper carries 15 A reliably
- SJT jacket stays flexible for tight-space routing
- Rated 125 V, 300 V max, 105 °C / 221 °F
- RoHS compliant and UL/CSA approved for safety
Six-foot extension for standard devices
This 6 ft power extension cord carries a NEMA 5-15P plug to a NEMA 5-15R receptacle. It suits transformers, servers, PDUs, PCs, monitors and laser printers that use a standard three-prong connection. The 14 AWG pure copper conductors deliver up to 15 A at 125 V.
Verify outlet type and load before use
Confirm the wall outlet accepts a NEMA 5-15P plug and that the attached equipment draws no more than 15 A. The cord is rated for a maximum of 300 V and an operating temperature of 105 °C or 221 °F. Ensure the jacket can reach the device without strain.
Cool running with no moving parts
Passive copper conductors generate negligible heat during normal loads up to 15 A. The SJT jacket remains flexible in tight routing and produces no audible noise. ROHS compliance and UL/CSA approval confirm the materials meet recognised safety standards.
Highlights
- Extends reach with NEMA 5-15P to 5-15R connectors
- 14 AWG pure copper carries 15 A reliably
- SJT jacket stays flexible for tight-space routing
- Rated 125 V, 300 V max, 105 °C / 221 °F
- RoHS compliant and UL/CSA approved for safety
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box and do I need any extra connectors?
The package contains the 6 ft extension cord with a NEMA 5-15P male plug on one end and a NEMA 5-15R female receptacle on the other; no additional connectors are required.
Which length should I choose for my setup?
Select the length that reaches your device without leaving excess cable coiled on the floor; this listing is the 6 ft version.
What does the 15 A rating mean when I plug in a server or printer?
The cord uses 14 AWG pure copper conductors rated for 125 V and 15 A continuous current, with a 300 V maximum voltage and 105 °C / 221 °F operating temperature, so it safely powers transformers, servers, PDUs, PCs, monitors and laser printers within those limits.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



